Operating instructions

What to do if...
Symptom Possible Cause Remedy
Light bulb is defective.
Interior lighting does not
work.
Please look in the “Changing
the light bulb” section.
Heavy build up of frost,
possibly also on the door
seal.
Door seal is not air tight
(possibly after reversing
the door).
Carefully warm the leaking
sections of the door seal
with a hair dryer (on a
cool setting). At the same
time shape the warmed
door seal by hand such
that it sits correctly.
Water on the floor or on
storage shelves.
Water drain hole is
blocked.
See the “Cleaning and
Care” section.
Temperature cannot be set
COOLMATIC function
switched on.
Switch off COOLMATIC
manually, or wait to set
the temperature until the
function has reset auto-
matically (refer also to
COOLMATIC section).
The compressor does not
start immediately after
pressing the COOLMATIC
button, or after changing
the temperature setting.
This is normal, no error has
occurred.
The compressor starts after
a period of time.
Changing the light bulb
Warning! There is a risk of electric shocks! Before changing the light
bulb, switch off the appliance and unplug it, or disconnect from the
mains supply.
Light bulb data: 220-240 V, max. 25 W
☞
1. To switch off, press the ON/OFF button
until the mains power light extinguish-
es.
2. Unplug the mains plug.
3. To change the light bulb, press on the
rear hook and at the same time slide
the light bulb cover in the direction
indicated by the arrow.
43
Downloaded from Fridge-Manual.com Manuals