Operating instructions

This chapter presents the operating options of Thyro-P using local operating and display unit LBA-2

and visualization and commissioning software Thyro-Tool Family.

LBA-2 for Thyro-P parameterization and process data

LBA-2 Tool for visualization /analysis of saved process data and messages of

LBA-2

SEK for operating of Thyro-P with LBA-2 on cabinet doors

Thyro-Tool Family for Thyro-P parameterization and process visualization

3.1 LOCAL OPERATING AND CONTROL UNIT LBA-2

The new local display and control unit LBA-2 can be used as a substitute for its predecessor LBA

model and enables easy operation for Thyro-P thyristor power controllers. The LBA-2 is equipped

with a graphic touch display and SD card and is designed to be used either with Bluetooth (model

2.000.000.409) or without Bluetooth (model 2.000.000.408). For both versions the process data

recorder feature is included (see chapter 3.1.5 LINE CHART)

With the menu based graphic user interface, LBA-2 offers an intuitive operating of Thyro-P – if

requested, further information for conﬁguration and parameterization can be seen in the menu

structure table.

If LBA-2 is not in use (parameterized) for a longer duration, the display will dim its brightness.

3.1.1 START SCREEN

The start screen of LBA-2 is its central display which is the ﬁrst to see after starting LBA-2. It can be

switched to:

• Line chart (6 values, optional)

• Operation display (6 values, optional)

• Bar chart (4 values, optional)

• Data logger

The values, which have been selected for the line chart, will be saved as process data on the SD

card by LBA-2. They can be analyzed by the free LBA-2 Tool (see chapter 3.2 LBA-2 TOOL).

The four buttons on the start screen have the following functions:

The house symbol will return the user to the start screen from any submenu.

The list symbol will take the user to the main menu of the LBA-2 with further menus to

parameterize and to conﬁgure

• LBA-2

• Thyro-P

The OFF button operates as a data backup before shutting down LBA-2.

NOTE

The LBA-2 must be shut down in order to save all settings and data prior to removing

the LBA-2 from the power controller.

By using the logo key, the user can switch between the line chart display, the bar chart

display, the operation display and the data logger.

3. OPERATION

FIG. 6:

START SCREEN LBA-2

Thyro-P