User manual

ManualsBrandsAEG ManualsFor HomeA5200AZ

How to identify parts of vacuum cleaner

HEPA filter EF35

Filter cover

Cyclone

assembly

Brush roll

Cord retainer

Carpet height selector

Brush roll cover

(on some models)

Power switch

Crevice tool

Dust bin release button

Dusting brush

Air path selector knob

Lower cord wrap

Upper cord wrap

Handle

Maintenance information

READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER.

Moving parts! Assemble the vacuum cleaner before using.

Hose with wand

Belt ZE090

Cyclone

Cover

Screen

Collar

Stair and upholstery brush

(on some models)

Washable dust bin filters

Power cord

HEPA filter EF35

Washable filters

Wash screen

Never use vacuum without all filters in place.

BRUSH ROLL

Clean monthly

BELT ZE090 – Replace worn,

cut or out of shape belt

Press button

to release bottom lid.

Debris will empty.

Close bottom lid

until it clicks.

Clean as needed to maintain suction

Empty dust cup after each use

Replace within 6 months

Lift latch to open cover.

Remove foam filter

from filter frame.

Rinse and dry

THOROUGHLY.

Twist to unlock

cyclone assembly

from dust bin.

Twist and remove

collar to release

screen from cyclone.

Rinse screen and dry

THOROUGHLY;

reassemble.

Reinstall filters.

Close cover

until it clicks.

Remove dust bin.

Replace HEPA filter

and cover. Turn to lock.

Snap dust bin

into place.

Twist HEPA cover

and lift off.

Handle release

Electrolux Customer Care HELPLINE 08445 614614

Calls to this number will be charged at 5p per minute at all times from a BT Landline.