GB 325 88-1594 Rev. 1-401 INSTRUCTION- AND INSTALLATION BOOK From the Electrolux Group. The world´s No.1 choice. The Electrolux Group is the world´s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in more than 150 countries around the world.
Congratulations from AEG Dear Customer, Congratulations with your new Hob. It is important that you become familiar with the functions and features of the Hob. You should therefore read these operating instructions as they will help you get the most out of your new Hob. Pay extra attention to sections marked . These are warning texts to help you avoid accidents. Keep the operating instructions.
Table of contents Contents Page no For the user Your new aplliance ....................................................................................... 2 Safety information ........................................................................................ 4 Description of the product ......................................................................... 6 Hofw to use ................................................................................................... 7 Burner ring/cover ........
Safety information These warnings are provided in the interests of your safety. Ensure you fully understand them before installing or using the appliance. Your safety is of paramount importance. If you are unsure about the meaning of these warnings contact the Customer Care Department for assistance. Service Never use plastic or aluminium dishes on the gas hob. If the hob is not working correctly, please carry out the following checks before contacting your local AEG Service Centre.
Description of the product Technical data Type of gas Adjusted to bottled gas: G30-28/37 mbar Cable type 0,75 mm² HO5 V2V2-F 240 V 1N + PE Convertible to Towngas - G110 / 8 mbar N L1 Max. nominal load Q na HS: Medium sized burner = 2,0 kW x 1 Large sized burner = 2,8 kW x 1 Total= 4,8 kW The Dropinett must be connected via an external switch with a contact gap of min. 3 mm (the main switch may be used) FSD The unit features fully-secured gas taps (thermo-fuse).
How to use Burner markings Gas installation Symbols at each control knob indicates which burner is adjusted with the control knob. In accordance with local requirements for domestic gas cooking appliances. Gas installation must only be carried out by an authorised person. For gas types see technical data. Front Burner Back burner Gas connection Panel markings Maximum flame The gas intake is situated at the lower rear of the appliance.
Burner ring/cover The unit´s externally measured length 145 mm: Cooker hood Together with the burner ring the burner ring/cover forms a space where the final mixture of gas and air takes place in order to make the gas burn correctly. 290 mm: Two-zone ceramic-top electric hob Two-burner gas hob Grill Fryer Wok Please note: It is consequently very important that the individual burner cover/ring is placed correctly on the burner.
Ignition 1. Depress and turn the control knob for the burner to the left to max. flame . (Ignition position) 2. The ignition electrode will emit sparks, and when the mixture of gas and air is correct, the burner will be ignited. If it is not possible to connect the unit to mains, a match may be used to ignite the burner. 3. After starting the burner, press the control knob for approx. 10 seconds to activate the automatic thermo-couple (thermo sensor ready). 5.
Caution: In order to avoid a hazard this appliance must be installed according to these instructions for installation Maintenance and cleaning MIN 55 Mounting The hob unit can be mounted in any type of kitchen with a table surface whose thickness is between 28 mm and 40 mm. For reasons of hygiene and safety, the cooking zones must be kept clean. Grease stains and spilled food generate smoke when heated, and can even cause fire.
Stainless steel surfaces Perform daily cleaning with a slightly damp cloth. For more severe soiling, use a liquid cream. Always clean the steel in the direction of the steel finish. To ensure that the steel retains its shine, it is recommended that you use a polishing agent for stainless steel on a regular basis. Always polish in the direction of the steel finish (crosswise). Never use steel wool, metal sponges or other abrasive cleaning agents. 3.
