Instruction Manual
How and when to use the controls
Start
After loading the laundry and placing 
the washing powder or liquid and 
additives into the appropriate 
compartments, before starting up the 
machine check that:
— the appliance is plugged in
—  the water supply taps are turned 
on
—  the drain hose is correctly and 
securely positioned
—  the door and the washing powder 
dispenser drawer are closed.
Depress  the  required  pushbutton(s). 
Select  the  washing  temperature  via 
the adjustable thermostat dial.
Select the required programme by 
turning the programme dial clockwise. 
Set the drying time if you are using 
the Wash ’n’ Dry option.
At this stage, press the ON/OFF 
button to start the programme up.
The pilot light will come on and the 
programme will start.
Stop
When the programme has finished, 
the programme dial will be in the «•» 
position and the machine will 
automatically stop.
If you have depressed the «Rinse 
Hold» button, the water remaining In 
the wash tub must be drained by 
pressing again the same button 
before opening the door.
If necessary, stop the machine by 
pressing the ON/OFF button again.
At the end of the programme, all the 
buttons must be reset to the «rest» 
position {not depressed).
The washing programmes
This washing machine has a wide 
range of programmes for optimum 
washing of all types of fabrics.
The differences between the 
programmes are the rotation rhythm 
of the drum, the washing 
temperature, the water level, use or 
not of the spin cycle etc.
Drying
The dryer part of this machine is a 
Turbo Condenser Dryer.
During the drying cycle the machine 
uses a small amount of water.
The clothes are dried by means of a 
continuous flow of hot air which as it 
passes through the drum, gradually 
reduces the moisture in the laundry. 
The moisture is then condensed 
within the machine. The condensed 
water is then drained away, together 
with the cooling water, through the 
drain hose. There is no need to 
provide special ventilation in the 
room in which the machine is 
installed.
The duration of the preset drying time 
may be shortened or extended during 
the drying cycle. Do not extend or 
shorten the drying period within the 
8-0 minute cycle. During this time 
both the machine and the laundry are 
cooling off.
During a power failure it is advisable 
to remove the laundry from the 
machine. After a short mains power 
failure the machine will continue with 
the selected programme once the 
power is restored.
16
Drying 2.25 kg (5 lb) of cotton
You have for example just machine- 
washed  and  spun  at  1200  rpm  4.5  kg 
(10 lb) of laundry.
They are cotton fabrics of medium 
weight which you want to iron as 
soon as they are dry.
Switch off the machine.
Then remove the laundry from the 
appliance and divide the items to 
obtain two loads of approx. 2.25 kg 
(5 lb) each.
1
Load the laundry
Load the items you have to dry one at 
a time, shaking them out loosely and 
close the door.
Select the programme
Turn the programme dial clockwise 
until number 6 on the dial coincides 
with the grey dot.
29










