Technical data

FIXTEC NUT
STANDARD OUTER
FLANGE NUT
Recommended for use with
flat cut-off wheels up to a
maximum thickness of 6mm
Recommended for use with depressed
centre grinding wheels with a
thickness greater than 6.0mm
Also recommended for use with
depressed centre grinding wheels up
to a maximum thickness of 6mm
Instruction for selecting and using the correct outer
flange nut.
Your AEG Angle Grinder has been supplied with two different outer flange nuts
A & B, please familiarise yourself with the specific use of each nut before
attaching an abrasive wheel to the angle grinder.
A B
For your safety the flange nut must be fully tightened
before starting to work with the angle grinder