Datasheet

AEG PS - Protect B. PRO - EN - 01/2012 V1 - Technical data in this document does not contain any binding guarantees or warranties. Content only serves for information purposes and can be modified at any time. We will make binding
commitments only upon receipt of concrete enquiries and customer notification of the relevant conditions. Due to the non-binding nature of these terms, we assume liability neither for the accuracy nor completeness of the data provided here. AEG is a registered trademark used under license from AB Electrolux.
AEG Power Solutions
Approach your local AEG Power Solutions
representative for further support.
Contact details can be found on:
www.aegps.com
Classification VI SS 211 acc. to IEC 62040-3 B. 750 PRO B. 1000 PRO B. 1400 PRO B. 1800 PRO B. 2300 PRO B. 3000 PRO
Power type rating 750 VA 1000 VA 1400 VA 1800 VA 2300 VA 3000 VA
675 W 900 W 1260 W 1620 W 2070 W 2700 W
Part number (UPS incl. internal battery) 600 000 8422 600 001 3872 600 000 8426 600 001 3873 600 000 8431 600 001 3875
Part number (battery pack) 600 001 3876 600 001 3874 600 001 3877
UPS INPUT
Input voltage 220 V AC / 230 V AC / 240 V AC
Voltage range without battery mode ±20 %
Frequency (auto selection) 50 Hz / 60 Hz ±5 Hz
Current consumption at nominal load (max.) 4 A 5.4 A 7.5 A 9.7 A 12.4 A 16.1 A
UPS OUTPUT
Rated output voltage / AVR technology 208 V AC / 220 V AC / 230 V AC (default) / 240 V AC ±10 % (±3 % free running)
Frequency in battery mode 50 Hz / 60 Hz ±1 Hz
Output current (at 230 V AC) 3.2 A 4.3 A 6.1 A 7.8 A 10 A 13 A
Transfer time at mains outage 2 – 6 ms (typical), 8 ms max.
Voltage waveform sinusoidal
Overload response (VI operation) <120 % for 5 min. / 120 – 150 % for 10 s / >150 % for 1 s
Overload response (battery operation) <110 % for 1 min. / 110 – 150 % for 10 s / 150 – 200 % for 500 ms
BATTERY
Type Sealed, maintenance free (proprietary brand), hot swappable
Integrated Yes Yes Yes Yes Yes Yes
Rated voltage 24 V DC 48 V DC 72 V DC
Battery management Temperature compensated with overload and deep discharge protection;
automatic battery test; battery pack detection
Autonomy time in min.
(full / half-load, cos j = 0.9lag)
3.5 / 10 3.5 / 11 5 / 13 4.5 / 13.5 3.5 / 13.5 4 / 11
Ditto UPS incl. battery expansion unit 14 / 36 17.5 / 43.5 15 / 36
Charging time (to 90 % rated capacity) 8 h
COMMUNICATION
User interface LCD display with digital indication of relevant UPS values
Interface (dual monitoring) RS232 and USB (with status notification and UPS data), additional communication slot in parallel mode
(SNMP / relay card); input contact for emergency power off
Shutdown software (on CD) 5 network licenses for all common OS (e.g. Windows, Linux, Mac)
Failure indicators (acoustic /visual) 3 LED indicators show UPS status, detailed indication via LCD display
(mains failure, overload, battery discharge, battery replace, fan failure)
GENERAL DATA
Efficiency (in ECO mode) >97 %
Efficiency (at whole AVR range) >90 %
Audible noise (1 m distance) ≤45 dB(A) ≤55 dB(A)
Ditto in ECO mode and max. 70 % load ≤40 dB(A) ≤45 dB(A)
Operating temperature range 0° – 4 0 °C
Humidity 0 – 90 % (without condensation)
Operation altitude Up to 1000 m at nominal load
EMC conformity EN 62040-2 Class C2, EN 61000-3-2, EN 61000-3-3
Product safety EN 62040-1
Data line protection RJ11 (telephone, fax, modem) / RJ45 (Ethernet 10 Mbit / s / 100 Mbit / s)
Mains input IEC 320 C14 IEC 320 C20
Number of outputs /
controllable via connectors
8 / 4
8 x IEC 320 C13
7 / 3
6 x IEC 320 C13, 1 x IEC 320 C19
Equipment color Black metal case / silver front
Dimensions approx. W x H x D (mm) 482.6 (19") x 88 (2 U) x 420 482.6 (19") x 88 (2 U) x 520 482.6 (19") x 88 (2 U) x 640
Weight approx. UPS incl. battery system 14.5 kg 15 kg 24 kg 25 kg 29 kg 29.5 kg
Battery expansion unit 16 kg (BP) 26.5 kg (BP) 39 kg (BP)
Shipment Mains input cord (1 x EU, 1 x UK), 2 x device connection cables (10 A), additional cable (16 A) for Protect B. 2300
PRO and Protect B. 3000 PRO, 2 x mounting brackets, 2 x base feet, 1 x management software “CompuWatch”
(CD), 5 network licenses, RS232 and USB cable, operating instructions
Conformity CE