User's Manual

--------------------------------------------------------------------------------15/26--------------------------------------------------------------------------------
4.6 EC
The EC parameter changes of the echo function setting.
input format: EC <SP> parameter <CR>
Parameter Function
0 echo on
1 echo off
output (example): 0 <CR>
4.7 GT
The reading command code is GT. For details to this function see chapter 2.
input format: GT <CR>
output: Dependent of the parameter settings and the actual antenna input signal, three
different responses are possible in operating mode 2:
• Transponder number, e.g. 001F37BD92 <CR>
• NoRead, e.g. FFFFFFFFFF <CR>
• <CR> as command acknowledge, if a filter function is active, which cut
the transponder code or the NoRead result.
annotation: In mode 2 the GT command triggers a reading process.
In mode 1 the GT command is effectiv too
6
.
In mode 0 the GT command has no effect.
4.8 INIT
With INIT a warm start with default values is executed.
input format: INIT <CR>
output: Version number <CR> if EC=1, otherwise <CR> only
course:
6
not compatible down to ASB 1.0