User's Manual

--------------------------------------------------------------------------------16/31--------------------------------------------------------------------------------
5.3 Interface
With the menu point “Interface” the hardware can be chosen the data is sent with in online or data-
base mode. Depending of the configuration of the reader the cable interface RS232 or USB and the
radio interface Bluetooth can be chosen.
Interface
USB/RS232
Bluetooth
5.4 Change Bluetooth Role
In Bluetooth communication, there are two possibilities for connection establishment:
• Master; the communication is established by the reader; connection is closed by the ARE H5 be-
fore it is switched off.
• Slave; the communication is established by the Bluetooth partner (PC, PDA, …); before the
reader is switched off it transmits <STX>DISCONNECT<ETX> to give the partner the possibil-
ity to close connection.
In the menu Bluetooth Role this can be changed.
Bluetooth Role
Slave
Master
5.5 Change Bluetooth Partner
In the menu Bluetooth Partner, in the first step, there is shown the actual Bluetooth Partner.
The choice of a new Bluetooth Partner can be started with the “arrow left” button. If the text “scan-
ning” is shown the main button starts a scan of maximal five Bluetooth modules that can be reached
by the ARE H5. The name of the found, potential partners, are shown in the menu. With the Arrow
Buttons, the favored Partner can be chosen.