User's Manual

--------------------------------------------------------------------------------31/31--------------------------------------------------------------------------------
7.10 Documentation, References
[1]: “Data exchange Protocol for the ARE H5” describes all available commands, parameters,
format of the transmission protocol, error codes and control characters, which are used in the
"Database mode" of the ARE H5.
[2]: “Operating instruction for the Reader Terminal program” describes the connection estab-
lishment of the ARE H5 with the PC, data transmission of actually read transponder codes,
up- and download of reader database and configuration of the ARE H5 with the PC.
7.11 Notification of changes
Date Description of Change Version Author
23.04.01 First edition 01
21.01.04 Change of Protection Class 03
12.02.07 Alignment with german edition 06 06
12.02.07 Format, IP protection class 07
27.09.10 Format, Reader Terminal instead of PC-Link 08
06.10.10 Replaced residual “PC-Link” with “Reader Terminal” 09
02.09.11
Serial instead of RS232, No Tag text, remove IRDA, “Type designations, supplied
items and accessories” table changes
10
21.09.11 Battery operating time removed, mass value 11
14.11.14 New menu navigation since V2.20003 and V2.2000B 12
18.12.15 Safety instructions for rechargeable li-ion batteries 13
15.03.15 USB driver installation 14 MK
18.05.16 FCC Information 15 MK
21.06.16 FCC Information correction 16 MK
7.12 Contacts
To improve our products, as well as its documentation is our permanent effort.
For any questions, feedback or comments please call:
Tel.: ++49 (0)731-140088-0
Fax: ++49 (0)731-140088-9000
e-mail: [e-mail]
http:\ www.aegid.de