User's Manual

--------------------------------------------------------------------------------17/31--------------------------------------------------------------------------------
Bluetooth Partner
Partner1
Partner2
Partner5
scan
If the Main Button is pressed again the ARE H5 is pairing with the chosen module. Depending on the
partner module, there has to be verified the connection code “0000” (4 x zero). If pairing was suc-
cessful the chosen module is the new Bluetooth partner.
5.6 The menu "Lock Up Reader"
Lock Up Reader
unlocked
locked
Whenever the main button is pressed, the reader goes into "Stand-by". If, within the next 10s, the
main button is pressed again, the reader starts a reading process. This process is responsible for the
main power consumption. In order to avoid unintended triggering of the reading process, a switch on
protection may be activated. This is achieved by pressing the buttons in the following sequence:
AttributeStand-By Operation Mode Lock Up Reader
unlocked
locked
MENU MENU MENU MENU
Off
When the switch on protection is activated, pressing the main button brings nevertheless the reader in-
to "Stand-by". However, it is not possible to branch from there into the reading process or into the
menus, as long as the switch on protection is activated.
The switch on protection is cancelled in the following way:
Press the buttons "arrow left" and "arrow right" simultaneously within the first 3s after the "Stand-by"
mode has been activated. After that the reader acts as usual in "Stand-by".