User's Manual

--------------------------------------------------------------------------------13/31--------------------------------------------------------------------------------
!
5.2 The menu "Operating Mode"
Using the menu "Operating Mode" it can be switched between the standard mode, 3 online modes and
the database mode.
Operating Mode
Standard
Online
Online H
Read/Transf.
Database/PC
5.2.1 Operating Mode "Online"
"Online" is basically equivalent to the "Standard" mode of the reader. However in "Online" the reading
results are transmitted via the serial interface and not stored in the built in memory. In this way the
data records can be processed in a connected PDA, PC or terminal. The display shows in its upper line
the code, as usual, and in its lower line the word “-- Online –“.
If the reader is in the "Standard mode" you can activate the mode "Online Operation" by using the but-
tons the following sequence. The first step is to go from "Stand-by" to the menu "Operating mode".
AttributeStand-By Operating Mode
MENU
MENU
Standard
Online
Important note: Correct function of the operating mode "Online operation" will be achieved on-
ly, if the reader is properly connected to a PC or computer terminal. Such connection should be
realized by using the special connection cable (AEG ID Order No 70180).