User's Manual

Rev 09
--------------------------------------------------------------------------------11/27--------------------------------------------------------------------------------
3.2.5 HF – Antenna field
With the command HF, the antenna field can be set or reset manually.
Input format: HF <SP> parameter <CR>
Parameter:
PARAMETER FUNCTION
0 Switch off antenna field (this stops automatic mode)
1 Switch on antenna field (this stops automatic mode)
2 Automaticmode, the antenne field is activated by reader to
comunicate with the transponder, afterwards it is switched off
automatically. Therefore it is not compatible with the pass-
word mode.
The reader answers with the adopted antenna mode.
Input (examplel): HF <SP> 2 <CR>
Output: 2 <CR>