User's Manual

--------------------------------------------------------------------------------22/45--------------------------------------------------------------------------------
Mifare 7 byte UID: request (WUPA)
anticollision level 1
select 1
anticollision level 2
select 2
ISO 15693: inventory
The reader answers the UID of a transponder.
Input format: GT <CR>
Output (example): 625E562A <CR>
3.4.3 HD – halt detected code
The command HD mutes the last selected transponder.
Input format: HD <CR>
Output (example): ACK <CR>
3.4.4 MD – mode of operation
There a two modes of operation available. It is possible, that the reader reads constantly or triggered by
an instruction.
Input format: MD <SP> parameter <CR>
Output (example): 2 <CR>
Parameter:
PARAMETER FUNCTION
0 constant reading mode
2 single reading mode