User's Manual

--------------------------------------------------------------------------------11/45--------------------------------------------------------------------------------
3.2 Instructions for the hardware settings
3.2.1 BD – baudrate
The command BD enables the change of the baud rate. The settings are directly effective.
Input format: BD <SP> parameter <CR>
Output (example): 2 <CR>
Parameter:
PARAMETER FUNCTION
0 4800 baud
1 9600 baud
2 19200 baud
3 38400 baud
4 57600 baud
5 115200 baud
3.2.2 HF – radio frequency
With the command HF you can switch the antenna field on and off.
Input format: HF <SP> parameter <CR>
Output (example): 1 <CR>
Parameter:
PARAMETER FUNCTION
0 off
1 on
3.2.3 HID – human interface device/keyboard
The command switches the interface ether to HID or RS232 emulation.
Input format: HID <SP> parameter <CR>