User Manual

Manual ACM 9 - ARE i9 release
Version:
05
Page:
37 / 45
Manual ACM9_ARE i9 release V05.docx
3.5 LED instruction set
ARE i9 employs a multi-color LED to signal different modes.
Basically below colors can be created:
The user can choose any color apart from white. This color is reserved for setup help functionality as described below.
The following modes use a distinct color each.
- Standby (LSTB)
- Reading (LGT)
- Transponder number successfully read (LRD)
- No Read (LNRD)
- Error (LERR)
- Process active (LPA)
- Process status (LPS
In addition, the user can choose to switch on the LED permanently or flashing.
The following instruction set is used:
Mode<SPACE>RGBFX<CR>
R – Red
G – Green
B – Blue
F - Flash
X – LED functionality ON or OFF for this mode
Allowed parameters are 1 (on) or 0 (off)