User manual

Display (7)

7.1 7.2

7.3

7.4

7.5

7.1 Child safety lock symbol

7.2

•

Duration of selected programme : after selecting a programme, the duration is dis-

played in hours and minutes (for example 2.05). The duration is calculated automatically

on the basis of the maximum recommended load for each type of fabric. After the pro-

gramme has started, the time remaining is updated every minute.

•

Alarm codes : in the event of operating problems, some alarm codes can be displayed,

for example E20 (see chapter «What to do if...»).

•

End of programme : when the programme has finished a blinking zero

is displayed,

the symbol 7.5 (Door locked) disappears on the display, the pilot light of button 8 goes

out and the door can be opened.

•

Incorrect option selection : if an option which is not compatible with the set wash

programme is selected, the message Err is displayed for a few seconds and the yellow

pilot light of button 8 light starts blinking.

•

Delay Start : the selected delay (20 hours max) set by the relevant button appears on

the display for a few seconds, then the duration of the previously selected programme

is displayed. The symbol 7.3 will appear on the display. The delay time value decreases

by one unit every hour. When only 1 hour remains, the time decreases every minute.

7.3 Delay Start - symbol

7.4 Programme progress display : the display shows the different washing programme

phases. After the appliance starts operating, the display show the relevant symbol of the

washing phase which is running:

= WASHING, = RINSING, = DRAINING, =

SPINNING - symbols

7.5 Door lock symbol

This symbol indicates if the door can be opened:

• symbol on: the door cannot be opened. The appliance is running or the appliance has

stopped with water left in the tub.

• symbol off: the door can be opened. The washing programme is finished.

Stand by

If your laundry is not removed within 10 minutes after the programme is finished, the

backlight of the display switches off and the energy saving system will be enabled. Only

the button 8 pilot light is blinking to indicate that the appliance has to be switched off. By

pressing any buttons the appliance will come out from the energy saving status and you

could set another washing programme or switch off the appliance.