User manual

17
Use
Programme progress display
After having pressed the Start/Pause button, the wash pilot lights comes on.
When the pilot light wash comes on
this means that the machine is performing
the washing cycle.
The door pilot light indicates if the
door can be opened:
● light on: the door cannot be opened.
The appliance is running.
● light off: the door can be opened. The washing programme is finished.
When the appliance is performing additional rinses the Extra Rinse pilot
light comes on.
Select an additional rinse
This appliance is designed for saving water.
However, for people with a very delicate
skin (allergic to detergents) it may be
necessary to rinse the laundry using an
extra quantity of water (extra rinse).
Press simultaneously the Spin Speed and
Prewash buttons for some seconds: the
Extra Rinse pilot light comes on in the
programme progress display. This function stays permanently on. To remove it
press the same buttons again until the Extra Rinse light goes off.
Altering an option or a running programme
It is possible to change any option before the programme carries it out. Before
you make any change, you must pause the washing machine by pressing the
Start/Pause button.
Changing a running programme is possible only by resetting it. Turn the
programme selector dial to O and then to the new programme position. The
washing water in the tub will be not emptied out. Start the new programme by
depressing the Start/Pause button again.
Interrupting a programme
Depress the Start/Pause button to interrupt a programme which is running, the
corresponding light starts to flash. Depress the button again to restart the
programme.
1000
800
600
400
192998381 gb.qxd 9/8/2008 10:12 AM Page 17