User manual

51
4. Using the arrow buttons
or select the cleaning
function OVEN CLEANER
SPRAY.
The oven now heats up to
the required temperature.
The duration of the process
(20 mins.) is shown in the
display.
After about 15 mins. the first signal sounds.
The optimum working temperature has now been reached.
5. Spray oven cleaner spray inside the oven interior.
After another 5 mins. another signal sounds for 2 minutes. By this time
the spraying should be finished. (After this point the oven would al-
ready have cooled down too much).
The time the oven cleaner spray needs to be left to work depends on
the manufacturer’s instructions.
3 The acoustic signal can be deactivated by pressing any button.
6. Wipe out the oven.
Performing Pyroluxe cleaning
1 Warning: The oven gets very hot during this process. Keep small chil-
dren away.
1 Important Before carrying out the pyrolytic cleaning process, all re-
movable parts, including the side rails, must be removed from the oven.
3 If you use the oven shelf runners that are available as special accesso-
ries, these must be removed before pyrolytic cleaning. If the oven
shelf runners are still in position C1-REMOVE RUNNERS appears in the
display. The Pyroluxe process then cannot be started due to a safety
cut-out that protects the oven shelf runners.
Performing Pyroluxe cleaning
1. First remove the worst of the residue manually.
2. Using the OPTION button, change to the Options menu.
_ __
OVEN CLEANER SPRAY
ý ý ý ýþ ýþ ý
ý ý
ý
ý
ý ý
888ûcþ þüþ1ü5.0ü5
ý
88.8ú8
wPmP¸¹º»¼-+
_ _
OVEN CLEANER SPRAY
ý ý ý ýþ ýþ ý
í ý
ý
ý
ý ý
888ûcþÝÜÜÜþ1ü5.0ü5
ý
00.20
wm¸¹º»¼-+