User manual

Installation

Preparing the wall unit - Extractor version

• The hood is supplied as an

extractor unit.

Before installing the hood, drill a

hole in the roof of the wall unit

(see Fig. 5). This hole is to allow

passage of the outlet pipe and the

power cable, and to facilitate

servicing.

• The wall unit must have a

minimum body depth (without

door) of 300 mm with recessed

light screen and min. 370 mm with

flush-mounted light screen. The unobstructed internal height must

be at least 370 mm.

Outlet hole - (extractor-filter version)

• When used as an extractor unit, the hood must be fitted with a

150mm diameter hose.

Fix the flange on the hood outlet hole, using 2 screws. Fig. 6a.

Filter version only

• Fix the deflector to the flange. Fig. 6b.

190

238

172

Fig. 5

Fig. 8a Fig. 8b