User manual

Outlet hole - Only for model (extractor-filter version)

• When used as an extractor unit, the hood must be fitted with a

120mm diameter hose.

• The dimensions and position of the air outlet are given in figure 9.

• Fix the flange supplied as kit onto the exit hole (bayonet fixture).

• Using the adapter, Ø100, Ø110 and Ø125 mm exhausting pipes can

be used.

Ø 125 mm exhausting hose: insert the adapter on the flange and

remove, using a proper tool, the upper unused Ø 100 and Ø 110

mm rings of the adapter.

Ø 110 mm exhausting pipe: same procedure, but removing

the Ø 100 mm ring only.

Ø 100 mm exhausting pipe: apply the adapter on the flange.

Fig. 8

Fig. 9