User manual

56
What to do if …
If you are unable to remedy the problem by following the above
suggestions, please contact your dealer or the Customer Care De-
partment.
1 Warning! Repairs to the appliance are only to be carried out by quali-
fied service engineers. Considerable danger to the user may result from
improper repairs.
Problem Possible cause Remedy
The oven is not heating
up
The oven has not been
switched on
Switch oven on
The clock has not been set Set the current time on the
clock
The required settings have
not been set
Check the settings
Oven safety cut-out has
been triggered
See Oven Safety Cut-out
The house wiring fuse (in the
fuse box) has tripped
Check fuse. If the fuses trip
several times, please call a
qualified electrician
The oven lighting is not
operating
The oven light bulb is faulty Replace oven light bulb
F11 appears in the clock
display
The meat probe has short
circuited or the plug of the
meat probe is not firmly in
position in the socket
Insert the meat probe plug
into the socket on the oven
side wall as far as it will go.
A fault code that is not
listed above appears in
the clock display
Electronic fault Switch the appliance off and
on again via the house fuse
or the safety switch in the
fuse box.
If it is displayed again, please
contact the Customer Care
Department