User manual

60
What to do if …
Problem Possible cause Remedy
The oven does not heat
up
The oven is not switched on Switch the oven on
The clock is not set Set the current time on the
clock
The required settings have not
been set
Check the settings
The oven’s safety cut-out has
been tripped
See “Safety fuse”
The fuse in the house’s electrical
wiring (fuse box) has been
tripped
Check fuse. If the fuses trip
repeatedly, please call an au-
thorised electrician
The oven lighting is not
operating
The oven bulb is faulty Change the oven bulb
The pyrolysis function is
not working (“C1“ is
shown in the time display)
Side rails/oven shelf runners
have not been removed
Remove side rails/oven shelf
runners
The oven does not heat
up. Time is lit
Demo mode is on Keep Selection button
pressed for 2 seconds, then
within 2 seconds press and
hold buttons Selection
and for 2 seconds
F11 appears in the clock
display
The meat probe has short
circuited or the plug of the meat
probe is not firmly in position in
the socket
Insert the plug of the meat
probe as far as it will go into
the socket on the side wall of
the oven
F2 appears in the clock
display
Door not properly closed or door
lock defective
Close door properly;
Turn the appliance off and on
again via the house fuse or
the safety switch in the fuse
box;
If displayed again, please con-
tact the Customer Care De-
partment
An error code not listed
above appears in the time
display
Switch off the appliance via
the house fuse or the safety
switch in the fuse box and
switch it on again
If displayed again, please con-
tact your local Service Force
Centre