User manual

49
Changing the length of the Pyroluxe
1. Proceed as described in the section Pyroluxe
2. While Cook time is flashing select the desired length of the pyroluxe
using or :
“2:15“or ”3:15”.
Cook time flashes for approximately 5 seconds.
Pyrolytic cleaning then starts.
3 If Cook time is no longer flashing, press the Select button again
and then perform the setting procedure.
Changing the Pyroluxe switch-off time
The Pyroluxe switch off time can be changed using the End time
clock function (within 2 minutes of setting the Pyroluxe).
When are the different pyroluxes set:
P2 - 2:15 = Pyroluxe Quick: For a light degree of soiling,
P1 - 3:15 = Pyroluxe Intensive: For a heavy degree of soiling.