User manual

48
Pyrolytic cleaning
1 Warning: The oven gets very hot during this process. Keep small children
away.
1 Important! All removable parts including the side rails must be removed
from the oven before using the pyroluxe function.
3 If you use the oven shelf runners that are available as special accessories,
these must be removed before pyrolytic cleaning.
If the side rails/oven shelf runners are still in place, ‘C1’ appears in the time
display.
The pyroluxe process then cannot be started due to a safety cut-out that
protects the side rails/oven shelf runners.
Pyrolysis
1. First remove the worst of the residue manually.
2. Select oven function Pyroluxe .
– “3:15“ appears in the time display,
– Continuously flashes for approximately 5 seconds.
Pyrolytic cleaning then starts.
3 The Light does not work.
When the temperature set is reached, the door is locked.
The bars of the heat indicator are illuminated until the door is unlocked
again.