User manual

Setting the clock functions
1. Push the Selection button again and again until necessary function indicator flashes.
2.
To set the time for Minute minder
, Duration or End , use " + " or " - " button.
The related function indicator comes on.
When the time period is completed, the function indicator flashes and an acoustic
signal sounds for 2 minutes.
With the functions Duration and End the oven switches off automatically.
3. Push any button to stop the signal.
Clock function Application
Time of day Shows the time. To set, change or check the time.
Minute minder To set a countdown time.
A signal sounds, after the time period is completed.
This function has no effect on the operation of the oven.
Duration To set how long the oven has to be in operation.
End To set the switch-off time for an oven function.
Duration and End can be used at the same time, if the oven is to be switched on and
off automatically later. In this case first set Duration
, then End .
Cancelling the clock functions
1. Push the Selection button again and again until necessary function indicator flashes.
2.
Push and hold button " - ".
After some seconds the clock function goes out.
Meat probe
Meat probe measures the core temperature of the meat. When the meat reaches set tem-
perature the oven switches off automatically.
There are two temperatures to be set:
• The oven temperature: See Roasting Table
• The core temperature: See Meat probe Table
Only use the meat probe supplied or genuine replacement parts
WARNING!
The meat probe is hot! Risk of burns! Be careful when you remove the tip and plug of the
meat probe.
Daily use
9