User manual

1. Insert the meat probe plug into the socket in
the side wall of the oven.
2. Insert the meat probe point in the middle of
the meat, as far as it goes.
3. Push selector button
again and again until
Meat probe indicator
flashes.
4.
Use " + " / " - " buttons to set the desired core
temperature. You can set the temperature
from 30 °C to 99 °C.
Refer to suggested values in the table.
5. Use control knobs to set the desired oven
cooking function and temperature.
6. When the meat reaches set core temperature, the oven switches off automatically.
7. Remove the meat probe.
In case the level of cooking is not satisfactory do above steps once again and set higher
core temperature.
Door lock
The door lock is deactivated when the appliance comes from the factory.
Activating the door lock: Pull the door lock for-
ward until it locks in place.
Deactivating the door lock: Push the door lock
back into the panel.
Opening the appliance door:
1. Push and hold the door lock.
2. Open the door.
Do not push the door lock when closing the
appliance door!
Switching off the appliance does not cancel
the mechanical door lock.
1
2
10
Daily use