AG901-8EN-rev2.
Front Back 1 21 3 22 4 5 2 12 13 14 11 19 17 20 18 6 23 8 9 10 15 16 7 AG901-8EN-rev2.indd 2 ELX12405_Ergorapido_AEG_2lang.
Content 3 English Thank you for choosing an AEG Ergorapido vacuum cleaner. Ergorapido is a rechargeable handheld stick vacuum cleaner intended for use on light dry household debris. In order to ensure the best results, always use original AEG accessories. They have been designed especially for your vacuum cleaner. Table of contents Unpacking and assembly . . . . . . . . . . . . . . . . . . . . . . 4 Charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Vacuuming . . . . . . . .
Unpacking and assembly Unpacking and assembly 1. Check that all parts are in the box. Fit the handle by carefully inserting it into the lower main body. Make sure that the cable does not jam. 2. Secure the handle by tightening the locking screw supplied. Use a screwdriver or a coin. Charging station 1. Position the charging station well away from heat sources, direct sunlight or wet places. Insert the adaptor into the mains and connect it to the charging station. AG901-8EN-rev2.
Charging 5 Charging 1. Ergorapido: The indicator light will come on once the Ergorapido is positioned correctly in the charging station. When fully charged, the LED will be on for a few seconds per minute. 2. Ergorapido Plus: The battery capacity display lights will come on one after another as the machine is charging after being positioned correctly in the charging station. 3.
Vacuuming Vacuuming floors and carpets 1. You should regularly check that the nozzle wheels and the brush roll are clean in order to avoid scratching sensitive floors. 2. Start Ergorapido by pushing the on/off button downwards: – First setting = Full power – Second setting = Intermediate power Vacuuming furniture, car seats etc. 1. Remove the hand unit by pressing the release buttons. The crevice nozzle and small brush are stored in the charging station. AG901-8EN-rev2.
Emptying and cleaning 7 Emptying and cleaning Ergorapido’s dust container must be emptied regularly and the dust container and the filters need to be cleaned to maintain a high suction power. Never wash dust containers or filters in a dishwasher. 3. Quick cleaning of the fine filter. (Recommended every cleaning). Release the dust container, pull/ release spring 5-6 times to dislodge dust. AG901-8EN-rev2.indd 7 ELX12405_Ergorapido_AEG_2lang.indd 7 1. Quick emptying of the dust container.
Cleaning Cleaning the brush roll The brush roll, the hose and the wheels may need to be cleaned if they become blocked or jammed for any reason. 1. First turn Ergorapido off. Push the brush roll release button. The hatch cover will come slightly free and the brush roll can be removed. 2. Lift out the brush roll and clean it. Use a sharp object to remove threads. Reassemble the roll, making sure it can spin freely. Close hatch cover. 2.
Removing the batteries 9 Removing batteries Improper handling of the batteries may be hazardous. Return the complete handheld unit to a recycling station. Batteries must be removed from the appliance before it is scrapped or recycled. Never dispose used batteries with household waste . 1. Batteries should always be run flat before removed. Ergorapido must be disconnected from the charging station when removing the batteries. Undo the screws. Carefully lift the hood 2.
Safety precuations / Consumer information Ergorapido should only be used by adults and only for normal vacuuming in a domestic environment. Make sure the vacuum cleaner is stored in a dry place. All servicing and repairs must be carried out by an authorized AEG service centre.
AG901-8EN-rev2.
Share more of our thinking at www.electrolux.com AG901-8EN-rev2.indd 12 ELX12405_Ergorapido_AEG_2lang.
