User's Manual
- 4 -
Battery level of Y12 remote control Status light display (blue light)
Power ≥75%
Four status lights are on
50% ≤ Power <75% Three status lights are on
25%≤ Power＜50% Two status lights are on
Power＜25% One status light is on
Power check after power on: After turning on the power of Y12 remote control, it will automatically enter the
ground station software (hereinafter referred to as GS), and the battery level of the remote control will be displayed
on the remote control.
Power battery of the aircraft
Power battery level check of the aircraft
Insert the power indicator into the internal buckle of the flexible flat cable of the battery, and the power
indicator will display the total power (6S, 25.2V) and the battery voltage of each cell, as shown below:
Flexible flat cable for battery level detection
12
3
4
56
7
Note: The black wire corresponds to "7" when connected.
Power battery charging of the aircraft
The power battery of the aircraft is equipped with a professional intelligent balance charger, built-in high-
performance microprocessor and professional operating software. Please connect the battery and charger as shown
below:
AEE Unmanned Aircraft System
Professional Leading