User's Manual


Installation of airborne camera
1.
Align the two pins (shown in red) of the gimbal with the clamping holder (shown in red) of the gimbal and insert
them into it, as shown below:
２．
Align the PCB contact of the gimbal with the signal pin of the quick release clamp, push the hanging plate
upwards, and the gimbal will be locked when a “click” sound is heard. As shown below:
3.
Check if the hanging plate of the gimbal to the drone is firm before powering on. As shown below, the gimbal is
fixed.
A
AEE Unmanned Aircraft System
Professional Leading