User's Manual
Table Of Contents
- [STC]User Manual_1[SHES488 ][26][c00]
- [STC]User Manual_2[SHES488 ][26][c00]
- [STC]User Manual_3[SHES488 ][26][c00]
- [STC]User Manual_4[SHES488 ][26][c00]
- [STC]User Manual_5[SHES488 ][26][c00]
- [STC]User Manual_6[SHES488 ][26][c00]
- [STC]User Manual_7[SHES488 ][26][c00]
- [STC]User Manual_8[SHES488 ][26][c00]
- [STC]User Manual_9[SHES488 ][26][c00]
- [STC]User Manual_10[SHES488 ][26][c00]
- [STC]User Manual_11[SHES488 ][26][c00]
- [STC]User Manual_12[SHES488 ][26][c00]
To comply with RF exposure requirement, a minimum separation distance of
20cm must be maintained between the user’s body and the device.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation.
42SAR & FCC Compliance Statement
42
SAR & FCC Compliance Statement