User's Manual
Table Of Contents
- [STC]User Manual_1[SHES488 ][26][c00]
- [STC]User Manual_2[SHES488 ][26][c00]
- [STC]User Manual_3[SHES488 ][26][c00]
- [STC]User Manual_4[SHES488 ][26][c00]
- [STC]User Manual_5[SHES488 ][26][c00]
- [STC]User Manual_6[SHES488 ][26][c00]
- [STC]User Manual_7[SHES488 ][26][c00]
- [STC]User Manual_8[SHES488 ][26][c00]
- [STC]User Manual_9[SHES488 ][26][c00]
- [STC]User Manual_10[SHES488 ][26][c00]
- [STC]User Manual_11[SHES488 ][26][c00]
- [STC]User Manual_12[SHES488 ][26][c00]
1
2
3
Charging & Data Transfer 8
Your AIR NEO comes with a partial charge, so you are good to fly right out of
the box. The average flight time of a full charge is 6+ minutes. It’s easy to
recharge the aerial camera’s battery when necessary using the USB-C cable
that came with your AIR NEO. If you purchased the AIR NEO Power Bank Docking
Sleeve simply slide your AIR NEO into it until you see the red Battery Indicator
Light turn on. When the light turns off your AIR NEO has a full charge.
Turn off the device and plug the
USB-C cable into the port on
the side of the device next
to the Power button.
To power supply
or computer
AIR NEO Power Bank
The red Battery Indicator
Light will turn on.
When the battery is fully
charged the red light
will turn off.
AIR NEO Power Bank