User Manual

aee.com
18
the camera face the tracker.
※
Case 3: if the quadcopter is ying at a distance >100m (beyond the tracker’s communication distance) away from the tracker, when you turn S4 mode switch
to “F-M”, the quadcopter’s ight status (e.g. hovering) will remain unchanged.
7 Downloading and Installing AEE AP+ App (Only for AEE S61 camera)
Download AEE App (iOS / Android)
Scan QR Code above
Download the AEE AP+ App to watch live video when using Quadcopter, through the following method. For iOS
users, please search "AEE AP+" in the App Store, download and install the App on your mobile device. For Android
users,please search "AEE AP+ " in the Google Play.
ANDROID APP ON
AEE AP+ iOS 6.1 or above Android 4.0 or above
Compatible Mobile Devices
iOS (system version iOS6.1 or above): Applicable for iPhone 4s, iPhone 5, iPhone 5s, iPhone 5c, iPod Touch 4 and iPod Touch 5. iPad 3, iPad 4, iPad mini and iPad
Air can also be used.
Android (Systemversion 4.0 or above), Applicable for mainstream models can be used.
● AEE will provide updates on future support for more types of mobile devices.
8 Connecting the Camera (Only for AEE S61 camera)
Follow the below procedures to connect the camera and the mobile device:
(1)Power on the Remote control,Camera and Wi-Fi Repeater. Note:Do not power on the quadcopter before Wi-Fi function of camera starts up.
(2)Wait for about 22s, the Wi-Fi indicator(blue) of camera blinks and the the Wi-Fi indicator(blue) of Repeater blinks slowly(0.3s on,3s off). Now open the Wi-Fi
function of mobile device. Please put the mobile device close to the repeater.
(3)Select “AEE_AP******”from the Wi-Fi network list and join in it.
● Please make sure that the mobile device close to the Wi-Fi repeater in order to get better performance of video transmission.
Select this network and enter the password "AEE12345" to join the network.
Figure 17
9 Using AEE AP+ App (Only for AEE S61 camera)
AEE AP+ is mainly used for remote control of the camera. It can achieve photo shooting, video recording and camera parameter setting, as well as display of ight
parameters.