User's Manual

8
English
Menus
Press [ M ] once to get to thecamera’s 3 menus. Press[ < ] [ > ] to switch between
Camcorder (video camera), Camera (camera) and Setup (settings).
Navigate themenus in thesame way as described in theButtons and functions
section above. Confirm your choice with [ OK ] and exit themenu by pressing [ M ].
Camcorder
Videocamera, contains thefollowing sub-menus:
• Resolution: Setting of video resolution 1080p (Full HD), 960p, 720/60, 720/30 and
WVGA (848×480). WVGA yield longer recording time, but poorer image quality.
NB: Use720p for thebest results in scenes with alot of movement.
• Capture Mode: Selectaudio or video recording.
Camera
Stillcamera, contains thefollowing sub-menus:
• Single Shot: Stillphotography, one picture at atime.
• Treble Shot: Takes3 pictures in rapid succession.
• Continuous: Setthetimer to take photos at any of thefollowing intervals: every
2seconds, every 3 seconds, etc. Thefollowing time intervals are possible: 2,
3, 5, 10, 20, 30. Picture-taking continues until[ ■ ] Stop (8) is depressed again,
thememory becomes full (“Out of Memory” will be shown in thedisplay) or
thebattery runsout.
• Self timer: Delayed shutter release; set delay as 0, 5 or 10 seconds.
• Resolution: Setimage resolution. 3M (2048×1536), 5M (2592×1944) or
8M(3200×2400, interpolated). Remember that higher-resolution images take up
morespace on thememory card.
Setup
Settings, contains thefollowing sub-menus:
• Beep: Buttonsound on/off. Thebutton sounds for photographing and video
recording are not affected. Thesecannot be switched off.
• Self Lamp: Turn the video rec/photo indicator off and on.
• Time Display: Switchdisplay of time and date on/off for recording of videofiles.
• Loop Record: Whenthis function is switched on, thevideo recording is
automatically saved every 15 minutes. Ifthefunction is switched off, therecording
is saved every 30 minutes.