Technical data

ManualsBrandsAeca ManualsBattery ChargerXTH 3000-12

Sine Wave Inverters

463

130323

256

40630

3x ø8

42|

|43

Steca Xtender XTM

1500-12, 2000-12, 2400-24, 3500-24, 2600-48, 4000-48

The basic functions of the combined inverter of the Steca

Xtender series are the inverter, the battery charger, the swit-

ching function and the support of external sources of alterna-

ting current. These functions can be combined and controlled

fully automatically, the range offers outstanding user-friendli-

ness and very good exploitation of the energy available.

All the settings of the Steca Xtender XTM can be remote con-

trolled. When a software with new functions is available, it

can be loaded into the system, so the Steca Xtender XTM

always stays up to date. Several Steca Xtender XTM can be

connected in parallel or to form a three-phase system. That

means that up to nine Steca Xtender XTM can work toge-

ther.

Multifunction contacts

These potential-free contacts can be programmed for many

different applications. They can react to any event outside or

inside of the inverter (grid availability, battery voltage, fault

message ...) They can also be programmed on a timer or can

be switched on during particular times (at night, at the week-

end ...). In this way, they can serve to start up a generator,

to switch off less important loads, to signal a fault, to charge

batteries depending on the situation, etc.

Smart-boost function

With the smart-boost function, the output of another source

of alternating current, such as a power generator or a land

connection, can be increased; even when special loads are

being used (inductive, asymmetric, with high switch-on cur-

rent). It is also possible to combine the Steca Xtender XTM

with almost all inverters which are already present in order to

increase the available output.

Product features

True sine wave voltage

Excellent overload capabilities

Optimal battery protection

Adjustable integrated battery charger

Multistage programmable battery charger with PFC

Automatic load detection

Standby load detection adjustable over a wide range,

starting from a low value

Parallel connectable

Best reliability

Can be used as a back-up system or uninterruptible

power supply (UPS)

Multifunction contact

Adjustable power sharing

Reliable and noiseless with any kind of load

Support of sources of alternating current (Smart Boost)

Automatic support for peak loads (Power Shaving)

Ultra-fast transfer relay

High efficiency

Control by digital signal processor (DSP)



Electronic protection functions

Deep discharge protection

Battery overvoltage shutdown

Overtemperature and overload protection

Short circuit protection

Reverse polarity protection by internal fuse

Acoustic alarm at deep discharge or overheating

Displays

5 LEDs show operating states

for operation, fault messages

Operation

Main switch

Adjustable load detection

Options

Type with 115 V / 60 Hz

Model with protective lacquered mainboard

Temperature sensor BTS-01 to correct the voltage

thresholds according to the current battery temperature

Certificates

Compliant with European Standards (CE)

RoHS compliant



—



[ar eas o f a pp lic at ion ]

[1,500 W ... 4,000 W]

Steca RCC-02

Remote control and display

(incl. 2 m cable)

Suitable for wall-mounting (see page 57).

Not illustrated:

Steca RCC-03

Remote control and display

(incl. 2 m cable)

Suitable for rack installation.

Steca BTS-01

Battery temperature sensor

(incl. 5 m cable)

This sensor allows the battery voltages to be adjusted to the

battery temperature.

Communications cable

Connection to the three-phase system or to the

parallel connection CAB-RJ45-2 (2 m)

This is used to connect several inverters together to a three-

phase system or a system connected in parallel.

XTM 1500-12 XTM 2000-12 XTM 2400-24 XTM 3500-24 XTM 2600-48 XTM 4000-48

Characterisation of the operating performance

System voltage 12 V 12 V 24 V 24 V 48 V 48 V

Continuous power 1,500 VA 2,000 VA 2,000 VA 3,000 VA 2,000 VA 3,500 VA

Power 30 min. 1,500 VA 2,000 VA 2,400 VA 3,500 VA 2,600 VA 4,000 VA

Power 5 sec. 3.4 kVA 4.8 kVA 6 kVA 9 kVA 6.5 kVA 10.5 kVA

Max. efficiency 93 % 93 % 94 % 94 % 96 % 96 %

Own consumption standby / ON 1.4 W / 8 W 1.4 W / 10 W 1.6 W / 9 W 1.6 W / 12 W 2 W / 10 W 2.1 W / 14 W

Power Factor Correction (PFC) according EN 61000-3-2

Acoustic level < 40 dB / < 45 dB (without / with ventilation)

Input side

Input voltage < 265 V AC (adjustable: 150 V AC … 265 V AC)

Charging current adjustable 0 A … 70 A 0 A … 100 A 0 A … 55 A 0 A … 90 A 0 A … 30 A 0 A … 50 A

Max. current on transfer system

50 A

Input frequency 45 Hz … 65 Hz

Battery side

Battery voltage 9.5 V … 17 V 9.5 V … 17 V 19 V … 34 V 19 V … 34 V 38 V … 68 V 38 V … 68 V

AC output side

Output voltage 230 V AC +/-2 % / 190 V AC … 245 V AC (true sine wave)

Output frequency 50 Hz, adjustable: 45 Hz … 65 Hz +/-0.05 % (crystal controlled)

Total harmonic distortion < 2 %

Load detection (standby) 2 W … 25 W

Operating conditions

Ambient temperature -20 °C … +55 °C

Fitting and construction

Power Smart-Boost 1,500 VA 2,000 VA 2,400 VA 3,500 VA 2,600 VA 4,000 VA

Input current balance adjustment 1 A … 50 A

Multifunction contact adjustable 2 independent contacts 16 A / 250 V AC (potential free change-over contacts)

Degree of protection IP 20

Dimensions (X x Y x Z) 323 x 463 x 130 mm

Weight 15 kg 18.5 kg 16.2 kg 21.2 kg 16.2 kg 22.9 kg

Cooling principle fan from 55 °C

Parallel connection possible 3 x 1 phase and three-phase

Technical data at 25 °C / 77 °F