Technical data

Solar Charge Controllers
Solar Charge Controllers
24|
Steca Elektronik GmbH | 87700 Memmingen | Germany | Fon [phone] | Fax [phone] | www.steca.com
|25
145
100
30
5
87
135
5
4x ø4
Steca Solsum F
6.6F, 8.8F, 10.10F
The Steca Solsum F-Line continues the huge success of one
of the most used SHS controllers. With a power range of up
to 10 A at automatically recognized 12 V or 24 V it fits to a
system sizes of maximum 240 W.
The circuit board is completely electronically protected and
with the LED user interface it is easy to check the battery sta-
te of charge at any time. Large terminals guarantee a simple
connection of solar panels, battery and load. The Steca Sol-
sum F works on PWM as a low loss series controller.
Product features
Series controller
Voltage regulation
Automatic detection of voltage
PWM control
Multistage charging technology
Current compensated load disconnection
Automatic load reconnection
Temperature compensation
Common positive grounding or negative grounding on
one terminal
Monthly maintenance charge
Electronic protection functions
Overcharge protection
Deep discharge protection
Reverse polarity protection of load, module and battery
Automatic electronic fuse
Short circuit protection of load and module
Overvoltage protection at module input
Open circuit protection without battery
Reverse current protection at night
Overtemperature and overload protection
Battery overvoltage shutdown
Displays
Multifunction LED display
Multi-coloured LED
4 LEDs show operating states
for operation, state of charge, fault messages
Options
Night light function pre-set in the factory or adjustable
via Steca PA RC 100
Parameterisation of function values via Steca PA RC 100
Certificates
Compliant with European Standards (CE)
RoHS compliant
Developed in Germany
Manufactured according to ISO 9001 and ISO 14001























—






[6 A ... 10 A]
Steca PA RC100
Remote control
(page 56)
MADE IN GERMANYMADE IN GERMANY
33
146
90
80
136
5
5
2x ø4
Steca PR
PR 0303, PR 0505
The Steca PR 0303 and PR 0505 solar charge controllers are
optimally suited for use in small solar home systems with mo-
dule currents up to 5 A.
A 75 Wp module can be connected, which easily allows ope-
ration of lamps, radios and a small television. All loads can be
switched off using the manual load switch on the controller.
The extremely low own consumption makes the Steca PR es-
pecially suitable for professional applications in telecommu-
nications and traffic management technology. Since this is a
serial controller, it is extremely flexible in the type of power
source that can be connected. The electronic fuse makes the
controller completely maintenance-free and robust.
Product features
Series controller
Voltage regulation
PWM control
Multistage charging technology
Current compensated load disconnection
Automatic load reconnection
Temperature compensation
Common positive grounding or negative grounding on
one terminal
Electronic protection functions
Overcharge protection
Deep discharge protection
Reverse polarity protection of load, module and battery
Automatic electronic fuse
Short circuit protection of load and module
Overvoltage protection at module input
Open circuit protection without battery
Reverse current protection at night
Overtemperature and overload protection
Battery overvoltage shutdown
Displays
Multi-coloured LED
3 multi-coloured LEDs show operating states
for operation, state of charge, fault messages
Operation
Manual load switch
Certificates
Approved by the World Bank for Laos
Compliant with European Standards (CE)
RoHS compliant
Made in Germany
Developed in Germany
Manufactured according to ISO 9001 and ISO 14001




















—







[ar eas o f a pp lic at ion ]
60 W
[3 A ... 5 A]
PR 0303 PR 0505
Characterisation of the operating performance
System voltage 12 V
Own consumption 3 mA
DC input side
Open circuit voltage solar module < 47 V
Module current 3 A 5 A
DC output side
Load current 3 A 5 A
End of charge voltage 13.7 V
Boost charge voltage 14.4 V
Reconnection voltage (LVR) 12.5 V
Deep discharge protection (LVD) 11 V … 11.5 V
Operating conditions
Ambient temperature -25 °C … +50 °C
Fitting and construction
Terminal (fine / single wire) 6 mm
2
/ 10 mm
2
- AWG 10 / 8
Degree of protection IP 32
Dimensions (X x Y x Z) 146 x 90 x 33 mm
Weight 160 g
Technical data at 25 °C / 77 °F
6.6F 8.8F 10.10F
Characterisation of the operating performance
System voltage 12 V (24 V)
Own consumption < 4 mA
DC input side
Open circuit voltage solar module < 47 V
Module current 6 A 8 A 10 A
DC output side
Load current 6 A 8 A 10 A
End of charge voltage 13.9 V (27.8 V)
Boost charge voltage 14.4 V (28.8 V)
Reconnection voltage (LVR) 12.4 V … 12.7 V
(24.8 V … 25.4 V)
Deep discharge protection (LVD) 11.2 V … 11.6 V
(22.4 V … 23.2 V)
Operating conditions
Ambient temperature -25 °C … +50 °C
Fitting and construction
Terminal (fine / single wire) 4 mm
2
/ 6 mm
2
- AWG 12 / 9
Degree of protection IP 32
Dimensions (X x Y x Z) 145 x 100 x 30 mm
Weight approx. 150 g
Technical data at 25 °C / 77 °F
[ar eas o f a pp lic at ion ]
240 W