Specifications

Peripherals
©2002 Bally Gaming and Systems 8-9 Peripherals
Coin Acceptors (cont.)
National Rejectors, Inc. GmbH • Postfach
1461 • Buxtehude 21604, Germany • Phone:
[phone] Fax: [phone] •
www.nationalrejectors.com
G-13, 0000
Power Requirements: 12
VDC +3/-1 Volts toler-
ances
Operating temperature 0°
to 55° C.
Acceptance: Up to six dif-
ferent coins.
Diameter: between .59” and 1.22” (15 and 31mm).
Thickness of coins: between .059” and .1” (l.5 and 2.6
mm)
Dimensions: Height 4” (102 mm) Width 3.5” (89 mm)
Depth 2” (52 mm)
Temperature range: 0
o
C up to +55
o
C
Coin inhibit: A common blocking line for all coins is
available. Single coin inhibit may be achieved by DIP
switches on the G-13.
Measuring principle: Three inductive sensors are
arranged to detect material, thickness, diameter and
embossing of coins as they pass. The passing coin
activates the sensors, providing different voltage
measuring values. These voltages are digitized and
processed within the microprocessor.
Programming of acceptor: A standard computer (IBM PC
or compatible) allows programming of the acceptor for
any coin acceptance. Programming means just the in-
sertion of a coin which should be accepted. Please refer
to the document “Use of program PROEMP.”
Wiring
1. Ground
2. +12 VDC
3, 4, 7, 8, 9, 10. Coin Signals*
5. N.C.
6. Coin Inhibit
*Coin Signals: <.07 volts active low / 150 mA Open col-
lector NPN. I max = 150 mA, Umax = 35
volts. Time of pulses: 100 msec +/- 10%.
G-13, 0000
Wire Insertion View
9 7 5 3 1
01 8 6 4 2
IDX, Incorporated • 400 W. Cedar St. • El
Dorado AR 71730 • Ph: [phone]
FAX: [phone] • http://www.idxinc.com
X-10 and X-70 X-Mark Xeptors
The X-10 and
X-70 X-Mark
Xeptors are multi-coin
acceptors which can be
field programmed to
distinguish and accept any
of up to six coins or tokens.
Multi-coin acceptance
offers the possibilities of
mixing promotional tokens
with standard tokens,
accepting older tokens with
new tokens in the process
of change-over, or
replacing expensive (4x)
hopper fill real currency
with economical tokens.
Precision diameter
measurement totally
eliminates shaved coin
acceptance problems. Its
built-in multi-color
indicator LED provides
operational status and
field diagnostic
information. Its novel Personality Plug modules ensure
plug compatibility in field retrofit applications.
Features:
• Distinguishes and accepts any of up to six different
coins or tokens.
• Reads multiple X-Mark codes and optionally detects
the presence of SmartMark.
• Diameter ranges: X-10: 0.650" to 1.490" (16mm to
38mm), straight drop configuration, X-70: 1.330" to
1.950" (34mm to 49mm) reverse drop configuration
• Actually measures coin diameter to +/-.005" typ (X-
10), +/-.007" typ X-70).
• Measures metal alloy 3 ways.
• Accepts up to 16 coins per second (X-10), 10 coins
per second (X-70).
• Slide on access covers shed spilled liquids.
• Built-in coin release and opening coin chute.
X-10 X-Mark Xeptor
X-70 X-Mark Xeptor