Specifications

Peripherals 8-8 ©2002 Bally Gaming and Systems
Coin Acceptors (cont.)
Money Controls • New Coin
Street, Royton Oldham OL2
6JZ United Kingdom • Phone:
[phone] Fax: [phone] •
www.moneycontrols.com
Condor CN103
Power Requirements: Volt-
age, 12 VDC to 32 VDC
Operating temperature: 0°
to 60° C.
Maintainable life of 20 mil-
lion coins.
Coinage: Accepts coins
within the diameter range
of .59-1.75" (15-44.5 mm)
and the thickness range of .059-.148" (1.5-3.75 mm).
Wiring Instructions:
Connector 1 Pin 1 Inhibit all
Pin 2 VACS +6V
Pin 3 +12 to 32 VDC
Pin 4 +12 to 32 VDC
Pin 5 +12 to 32 VDC
Pin 6 +0V
Connector 2 Pin 1 Accept (b) NPN generation
Pin 2 VACS NPN
Pin 3 Alarm
Pin 4 Error
Connector 3 Serial Port
Connector 4 LCD display
Alarm: Open collector NPN is activated for 2 seconds
with inhibit all. This condition occurs when coins travel
in reverse, too slowly or block the opto beams. A con-
tinuous yellow LED will result for the duration of the alarm.
During this time a pulse will appear on the error pin.
Error: When a critical failure is detected at power up a
500ms pulse will be given on the error line and will re-
peat every 2 seconds. The LED will flash red and all
coins will be inhibited.
Teach and Run™ Programming: Follow these steps to
program:
CN103
Security: The acceptance window can be adjusted to
increase fraud rejection or increase coin acceptance.