Specifications

Peripherals 8-14 ©2002 Bally Gaming and Systems
Bill Acceptors
Interface: The WBA-SS uses an ID-003 interface. The
ID-003 interface is a bidirectional serial interface. The
machine is able to receive status reports from the WBA
in response to appropriate commands (Figure 7).
US dollar ($) DIP Switch Settings
Troubleshooting
Stand-alone Test Mode
Accomplish this function by applying power to the unit’s
transport and head only.
• Remove power.
• Prior to starting, set the DIP switches. Place DIP
switches 1, 2, 3 and 8 in the ON position.
• Apply power.
• Turn DIP switch 8 OFF. The unit should cycle briefly.
• The unit is now ready for the test.
Figure 6
Figure 7
Component Identification
noitpircseD esuaCelbaborP noituloSelbissoP
noitcejeRlliB
ylreporptestonsehctiwsPIDsehctiwsPIDteS
erastlebro/dnarelloR
ytridylevissecxe
dlimhtiwsrellordnadaehnaelC
noitulosretawdnapaos
nodelbasidnoitanimoneD
emag
snoitpoemagkcehC
noylreporptestontimiltiderC
emag
reporproftimiltidercteS
ecnatpecca
dellatsnitonro,llufsixobhsaC
ylreporp
xobhsacyfirevdnakcehC
noitidnoc
tinu,noitarbilacfotuosrosneS
erawtfosretfadetarbilacton
edargpu
reporpgnisutinuetarbilaC
serudecorp
DI/erawtfosreporprofkcehC
lototorp
ytivitcAoN
sDELoN/tinuehtotrewopoN
elbisiv
,snip,ecruosrewoPkcehC
rotcennocdnaseriw
ecnatpeccatratstonlliW
elcyc/erudecorp
erawtfosreporprofkcehC
locotorpDI/egasu
sllibtpeccatonlliwtub,selcyChctiwsPIDreporprofkcehC
sgnittesemagdna
sutatsrorrenanirotpeccAyfirevottsetenoladnatsnuR
nosthgilon,draobUPCDAB
draobUPC
egnahcro,draobUPCecalpeR
tinutuo
noitarbilacfotuotinUreporpgnisutinuetarbilaC
serudecorp
NOTE: Perform this test outside the
game using an extension harness, or
power supply hookup.
NO
FFO12345678
300-DI31/21/11/01-ABW
1-WS2-WS3-WS4-WS5-WS6-WS7-WS8-WS
RID1$5$01$02$05$001$FFO
}ERAWMRIFNIHTIWFI{ECNATPECCAYAW-2:"NO")RID(
}ERAWMRIFNIHTIWFI{ECNATPECCAYAW-4:"FFO"