Specifications

Peripherals
©2002 Bally Gaming and Systems 8-13 Peripherals
Bill Acceptors
JCM American Corporation • 925 Pilot
Road, Las Vegas, NV 89119 • Tel: (702)
651-0000, Toll Free: [phone], Fax:
[phone] • www.jcm-american.com
JCM® WBA-SS
Power Requirements: Voltage
Range, 95 to 135 VAC with power
supply 50 to 60 Hz, or 12 VDC max
20 VA.
Magazine capacity 600 notes.
Operating temperature recom-
mended 0° to 45° C.
Adjustable Bill Slot: The WBA-SS has the ability to read a
wide range of bill sizes. Four adjustment guides are avail-
able for bills that are 65 mm to 80 mm wide (Figure 1).
Collecting Bills: Collect bills by pressing the release le-
ver and pulling the stacker box towards you (Figure 2).
Open the stacker box cover and remove the bills inside
(Figure 3).
Bill Jams: Remove jammed bills from the bill head by
moving the release catches on both sides of the head
towards you. Open the acceptor head to access the
jammed bill (Figure 4).
Remove jammed bills from the transfer area by pulling
the access lever and opening the top cover (Figure 5).
Occasionally, a bill jams near the inlet of the stacker box.
Push the release lever of the stacker box and remove it
to access the jammed bill (Figure 6).
WBA-SS
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5