Specifications

5
T1 SERIES (500VA-1kVA)
• Compact and stylish, ideal for ofce or home
• Excellent performance and reliability, designed for maximum equipment protection
• Advanced MCU control technology, enhancing UPS performance
• 500VA, 700VA and 1kVA, powerful enough for desktop PC’s
• Conforms to all necessary safety and CE specications
• No noise, place it on your desktop
• Simple, easy to read LCD display
• Fast, low voltage protection buck and boost
• Predicting mains failure
• Automatic voltage regulation saving battery power
• Low battery protection preventing deep discharge
• Advanced battery management
• Modem, phone line and peripheral equipment protection
• Hot battery swap, no need to switch off UPS (except for 1kVA).
Model ST1005 ST1007 ST1010
Capacity 500VA/300W 700VA/420W 1000VA/600W
Input
Input Voltage Range 220/230/240VAC (+25% / -30%)
Input Frequency 44Hz ~ 56Hz
Output
Output Voltage 220/230/240VAC ± 10% (On Battery Mode)
Output Voltage Regulation ± 10%
Output Frequency (Battery Mode) 50 ± 0.1Hz
Overload Capability Delayed protection when the output is > 150% overload
Battery
Number of Batteries 1 cell 1 cell 2 cells
Recharge Time to 90% < 10 hours
Transfertime
AC to DC < typical 6 ms
Indication
LCD AC Mode, Battery Mode, Output Status, Battery Capacity, Overload, UPS Fault
AudibleAlarm
Battery Mode Long beeping
Low Battery Continuous beeping
Overload Short beeping
Dimensions
W x H x D (mm) 90 x 165 x 325 90 x 165 x 325 120 x 210 x 380
Weight
Net Weight w/ Battery (kgs) 6.3 6.6 15
Environmental
Operating Temperature -5 ~ +400 C
Relative Humidity < 90% (Non-Condensing)
Audible Noise <45dBA @ 1 Meter <50dBA @ 1 Meter <55dBA @ 1 Meter
All information contained in this brochure is purely indicative and can not be used to form any contractual obligations.
Specication or design can be changed at anytime without prior notice.
UPS - LINE INTERACTIVE
MODIFIEDSINEWAVE
UPS - LINE INTERACTIVE
MODIFIEDSINEWAVE