Specifications
41
41
SERVO TYPE FULLY AUTOMATIC VOLTAGE
STABILISER (SINGLE PHASE)
DESCRIPTION:
The SVC fully automatic voltage regulator consists of a contact
voltage regulator, samplingcontrol circuit and service motor as well.
It features small waveform distortion, high efciency and high power
factor. It is also not affected by input frequency variations.
It can be widely used in most situations where voltage
stabilisation is required.
Model 500VA 1kVA 1.5kVA 2kVA 3kVA 5kVA 7.5kVA 10kVA 15kVA 20kVA 30kVA
Input Voltage 150V-250V 160V-250V 150V-250V
Output Voltage 220V ± 3%
Frequency 50Hz/60Hz
Response Time < 1s (against 10% input voltage deviation)
Efciency > 90%
Ambient
Temperature
-100C ~ +400C
Relative Humidity < 90%
Power Factor 0.8
Insulation
Resistance
> 5MΩ
Length (cm) 18.5 21 21 27.5 29 45 47 47 42 42 42
Width (cm) 15 18 18 23.5 23 24 26 26 38 38 38
Height (cm) 12.5 14.5 14.5 18.5 22 18.5 22 22 73 73 83
Weight (kg) 4.6 6.5 7 10.5 13.6 22.4 40 43 75.5 80 87
Append “SVC-” to the model above for the full part number
SERVO TYPE
1PHASE