PRODUCT INDEX Line Interactive • Modified Sinewave (T1) • Pure Sinewave (T2) Online Double Conversion • 1 Phase Input / 1 Phase Output (T3) • 3 Phase Input / 1 Phase Output (T4) • 3 Phase Input / 3 Phase Output (T5) Specialist Networking Distributor | CTN: 021 423 7115 | DBN: 087 943 9076 JHB: 011 351 9800 www.duxbury.co.
POWER LINE DISTURBANCES Dip (Sag): is a short term decrease in line voltage. Usually it results from a short circuit in the power line or a sudden increase in electrical load on the line (start up of large loads), utility switching or equipment failure. Surge: is the exact opposite of a dip. It is a temporary increase in line voltage that lasts at least one cycle (approx. 16mS). It can be triggered off by rapid reduction in power loads or by utility switching.
POWER CONDITIONING & UPS OVERVIEW OF DIFFERENT UPS TYPES Most of the critical applications in data processing and other industries are now protected by Uninterruptible Power Supplies (UPS). It is essential that the different types and performance levels are covered by international standards (IEC). UPS systems are intended to improve the quality of AC power and provide a redundant (back-up) power source. Power quality defects which may be improved by a UPS include surges, noise or sags.
UPS - LINE INTERACTIVE MODIFIED SINEWAVE T1X SERIES (650VA-2kVA) • • • • • • • • Compact size Excellent microprocessor control guarantees high reliability Boost and buck AVR for voltage stabilisation Auto restart with AC recovery Simulated sinewave inverter output Off-mode charging Cold start function USB comm. standard with RJ11 telephone protection.
UPS - LINE INTERACTIVE MODIFIED SINEWAVE T1 SERIES (500VA-1kVA) • • • • • • • • • • • • • • Compact and stylish, ideal for office or home Excellent performance and reliability, designed for maximum equipment protection Advanced MCU control technology, enhancing UPS performance 500VA, 700VA and 1kVA, powerful enough for desktop PC’s Conforms to all necessary safety and CE specifications No noise, place it on your desktop Simple, easy to read LCD display Fast, low voltage protection buck and boost Predictin
UPS - LINE INTERACTIVE PURE SINEWAVE T2 SERIES (1kVA-3kVA) Launched in 2005 and superseding the highly regarded PHD IP Series UPS, the T2 Series benefits from the latest microprocessor Control Unit (MCU) technology, and now offers even greater value for money. The T2 is aimed at users that require protection from line voltage fluctuations and require a reliable and constant power source. The T2 is a sophisticated unit utilizing full digital control technology.
UPS - LINE INTERACTIVE PURE SINEWAVE T2R SERIES (2kVA-10kVA) FEATURES: • • • • • • • • • • • • • • • True Bi-Lateral Converter Line-interactive UPS Pure Sinewave and suitable for linear and non-linear loads Rack and Tower Convertible Standard and long backup time models available Multi-Interface slot for RS232, SNMP, USB, RS485, Modbus, Dry Contact and customised interfaces Various communication options selectable and all can be available at the same time Complete protection for overload, overheat, surges
UPS - LINE INTERACTIVE PURE SINEWAVE Model Capacity ST2R20 ST2R30 ST2R50 ST2R75 ST2R100 2kVA/1250W 3kVA/1875W 5kVA/3125W 7.5kVA/4688W 10kVA/6250W Input Voltage 220/230/240VAC Voltage Range 170VAC~300VAC Frequency Range 45Hz~70Hz Auto-Sensing Output Voltage 220/230/240VAC ± 3% settable on the LCD Frequency Range 50Hz or 60Hz ± 0.
UPS - LINE INTERACTIVE PURE SINEWAVE [Long Standby] T2X SERIES (800W-8kW) The Star T2X UPS is an All-In-One user friendly UPS, easy to handle, suitable and compatible for almost all Home/Office applications (Linear and non-linear loads including Air Conditioners!). Being a line interactive UPS, it can produce clean and perfect PURE SINEWAVES, by providing the best power quality for all your electric equipment.
UPS - LINE INTERACTIVE PURE SINEWAVE [Long Standby] A Positive DC connector B Negative DC connector C Cooling Fan D AC Output Fuse E AC Output Terminal Block F Solar Panel Input. Model Capacity Watt/Amps Normal Voltage ST2010X ST2020X ST2040X ST2060X ST2080X 800W/3.6A 1600W/7.2A 2400W/10.9A 4000W/18.1A 6000W/27.2A 8000W/36.
UPS - ONLINE (TRANSFORMERLESS) 1 PHASE INPUT, 1 PHASE OUTPUT T3 SERIES (1kVA-10kVA) The T3 is a physically small On-Line double conversion UPS but retains all the features normally associated with On-Line technology, but what is On-Line double conversion technology and why does it matter? Simply put “double conversion” is where the mains supply is rectified to a clean DC voltage and rebuilt into a very clean and regulated AC voltage, at all times your critical load runs from this clean no break supply.
UPS - ONLINE (TRANSFORMERLESS) 1 PHASE INPUT, 1 PHASE OUTPUT Model ST3010 ST3020 Topology ST3030 ST3060 ST3100 6000VA/4800W 10000VA/8000W True On-Line, Double Conversion On-battery Waveform Pure Sine Wave Input Maximum Capacity (VA/W) 1000VA/800W 2000VA/1600W Nominal Input Input Voltage Regulation 3000VA/2400W 230VAC 160~300 VAC Single Phase w/ Ground Nominal Input Frequency 170~285 VAC Single Phase w/Ground 50/60 ± 4Hz Input PFC ≥0.95 ≥0.
UPS - ONLINE (TRANSFORMER) 1 PHASE INPUT, 1 PHASE OUTPUT T3T SERIES (10kVA - 15kVA) The T3T is a transformer isolated On-Line double conversion UPS but what is On-Line double conversion technology and why does it matter? Simply put “double conversion” is where the mains supply is rectified to a clean DC voltage and rebuilt into a very clean and regulated AC voltage, at all times your critical load runs from this clean no break supply and is isolated from the input.
UPS - ONLINE (TRANSFORMER) 1 PHASE INPUT, 1 PHASE OUTPUT Model* ST3020T Topology ST3030T ST3050T ST3060T ST3100T ST3150T True Online Double Conversion, Isolated Transformer Output Input Maximum Capacity (kVA/kW) 2/1.4 3/2.1 5/3.5 6/4.2 Input Voltage Regulation 220VAC ±25% Nominal Input Frequency 50Hz ± 5% Battery Voltage 48VDC 96VDC 10/7 15/10.
UPS - ONLINE (TRANSFORMERLESS) 1 PHASE INPUT, 1 PHASE OUTPUT T3R SERIES (1kVA-10kVA) With ever greater demands being made on valuable floor space, many IT managers are moving towards computer rack solutions rather than conventional floor standing options offered in the past. The same philosophy has affected the UPS industry with many UPS now being located with the computer inside the rack cabinet.
UPS - ONLINE (TRANSFORMERLESS) 1 PHASE INPUT, 1 PHASE OUTPUT Model ST3R10 ST3R20 Topology ST3R30 ST3R60 ST3R100 True On-Line, Double Conversion Output Waveform Pure Sine Wave Input Maximum Capacity (VA/W)** 1000VA/800W 2000VA/1600W Nominal Input Voltage Input Regulation Voltage 3000VA/2400W 6000VA/4800W 10000VA/8kW 230 VAC 160~300 VAC Single Phase w/ Ground Nominal Input Frequency 160~300 VAC Single Phase w/ Ground 50/60 ± 4Hz Input PFC ≥0.95 ≥0.
UPS - ONLINE (TRANSFORMERLESS) 1 PHASE INPUT, 1 PHASE OUTPUT FP SERIES (1kVA-6kVA) The FP series UPS is a true on-line double conversion UPS offering rack and tower placements. It is a reliable and effective system to protect critical systems from power outages and sags. The FP series is designed for optimising power quality with the ease of installation. APPLICATIONS • • • • • Computers Network Servers Workstations Wireless Communications Other Electronic Peripherals.
UPS - ONLINE (TRANSFORMERLESS) 1 PHASE INPUT, 1 PHASE OUTPUT Model FP1600 FP2500 Topology FP3200 FP6000 True On-Line, Double Conversion On-battery Waveform Pure Sine Wave Input Maximum Capacity (VA/W) 1600VA / 1120W 2500VA / 1750W Nominal Input (Voltage Regulation) * 3200VA / 2240W 6000VA / 4200W 230VAC (160VAC-276VAC) Nominal Input Frequency 50/60 ± 5Hz Input PFC > 0.
UPS - ONLINE (TRANSFORMERLESS) 3 PHASE INPUT, 1 PHASE OUTPUT T4 SERIES (10kVA-20kVA) The T4 is a physically small On-Line UPS but retains all the features normally associated with double conversion technology. Simply put "double-conversion" is where the mains supply is rectified to a DC voltage and rebuilt into a very clean and regulated AC voltage, at all times your critical load runs from this clean no break supply.
UPS - ONLINE (TRANSFORMERLESS) 3 PHASE INPUT, 1 PHASE OUTPUT Model ST4100 ST4150 Topology ST4200 True On-Line, Double Conversion On-battery Waveform Pure Sine Wave Input Maximum Capacity (kVA/kW) 10kVA/8kW 15kVA/12kW Nominal Input Voltage 20kVA/16kW 380VAC Three Phase (3 Φ 4W + G) Input Voltage Regulation 304 ~ 478 VAC Nominal Input Frequency 50/60 ± 4Hz Input PFC Input Short Protection ≥0.
UPS - ONLINE (TRANSFORMERLESS) 3 PHASE INPUT, 1 PHASE OUTPUT T4T SERIES (10kVA-50kVA) The T4T Series UPS is an online sine wave UPS mainly designed for major equipment used in large-scaled data centers (such as measurement equipment, industrial automation equipment, etc.) with high performance. Its high reliability provides necessary protection on load for the users in finance, communication, traffic, tax, forces, security, power source, education, government and enterprise etc.
UPS - ONLINE (TRANSFORMER) 3 PHASE INPUT, 1 PHASE OUTPUT Model ST4100T ST4150T ST4200T ST4300T ST4400T ST4500T Input Voltage Range 400VAC (-25%~+25%) Frequency Range 50Hz / 60Hz ± 5% Phase Battery Voltage Three phases, five wires 16 x 12Vdc = 192Vdc 29 × 12Vdc = 348Vdc Output Rated Power - kVA/kW 10/7 15/10.
UPS - ONLINE (TRANSFORMER) 3 PHASE INPUT, 3 PHASE OUTPUT T5 SERIES (10kVA-400kVA) ST5 (10kVA-400kVA) features true on line double conversion and zero sec. transfer time. Intellectual blocking design, adopts advanced power apparatus IGBT, predominantly a SPWM inverter. It also features MMBM intellectual multi-modes battery management and intellectual monitoring and management software. The parallel capacity can extend the on line parallel redundancy or N+1 for upgradeability.
UPS - ONLINE (TRANSFORMER) 3 PHASE INPUT, 3 PHASE OUTPUT Model ST5 010 ST5 020 ST5 030 ST5 040 ST5 050 ST5 060 ST5 080 ST5 100 ST5 120 ST5 160 ST5 200 ST5 300 ST5 400 Input Voltage * 380/400VAC ± 25% Rectifier Frequency Range 40Hz~65Hz SYNC Frequency Tracking Range 50Hz ± 5% (± 10% option) Phase 3φ4W+PE Battery 12Vdc × 29 = 348Vdc / 12vDC x 30 = 360Vdc Charge Current (Max) 5~40A (adjustable) 5~80A (adjustable) Charge DC Voltage Regulation 395V ± 5Vdc DC Ripple Voltage <1% Out
UPS - ONLINE (TRANSFORMER) 3 PHASE INPUT, 3 PHASE OUTPUT T6 SERIES 10kVA-1MVA The AEC Star T6 series UPS is an on-lne double conversion three phase UPS with a fully digitised intelligent galvanic isolation design. Single unit ratings of up to 1MVA are available and parallel capability is also available. The UPS can also be cusomised for various input voltages allowing them to be used in various applications (e.g. mining).
UPS - ONLINE (TRANSFORMER) 3 PHASE INPUT, 3 PHASE OUTPUT Model kVA ST6 010 ST6 015 ST6 020 ST6 030 ST6 040 ST6 050 ST6 060 ST6 080 ST6 100 ST6 120 ST6 160 ST6 240 ST6 320 ST6 400 10 15 20 30 40 50 60 80 100 120 160 240 320 400 160 200 17.4 21.
UPS - ONLINE (TRANSFORMER) 3 PHASE INPUT, 3 PHASE OUTPUT T2000 SERIES (20kVA-600kVA) TIME TO PROTECT With many thousands of units sold, the PHD T2000 series UPS is now legendary. Chosen by major enterprises around the world for its reliability and performance, words simply can’t explain its phenomenal success. But we don’t rest on our laurels, the T2000 has been modified and updated and now offers even greater performance.
UPS - ONLINE (TRANSFORMER) 3 PHASE INPUT, 3 PHASE OUTPUT Model* ST20003360 ST20003380 ST200033100 ST200033120 ST200033150 ST200033200 80 100 120 150 200 Input Rectifier Nominal Capacity - kVA 60 Input Nominal Voltage 200/208 V 3P or 380/400/415 V 3P + N or 440/465/480 V 3P Nominal Frequency 50 / 60 Hz (Can be used as frequency converter) Frequency Range + - 5% P.F.
UPS - ONLINE (TRANSFORMERLESS) 3 PHASE INPUT, 3 PHASE OUTPUT MP MODULAR SERIES - 10-300KVA FEATURES: • • • • • • • • • • Hot swappable for each module, easy maintenance Redundant and High Reliability Strong load adaptability for linear and nonlinear load Intelligent module and system protection design Double DSP controller for individual power module IGBT modules rather than discrete components are applied in the power module.
UPS - ONLINE (TRANSFORMERLESS) 1 PHASE INPUT, 1 PHASE OUTPUT Specifications Capacity 10-200KVA 300KVA 380V/400V/415V, -40%~+25% 380V/400V/415V,-20%~+25% 50/60Hz, 40-70HZ 50/60Hz, 40-70HZ >0.99 >0.
INVERTER/CHARGERS MODIFIED SINEWAVE IG SERIES - INVERTER/CHARGER (600VA-2kVA) • • • • • • • Simulated sinewave inverter Selectable input voltage range for home appliances and personal computers Auto restart with AC recovery Overload, and short circuit protection Cold start function Generator and Computer-related products compatible Reverse polarity protection.
INVERTER/CHARGERS MODIFIED SINEWAVE SKX-M SERIES - MODIFIED SINEWAVE INVERTER (150W-3kW) • • • • • Modified sinewave output With or Without Battery Charger High Surge Rating Hot Swappable Fuse Reverse Polarity Protection (Fuse).
INVERTER/CHARGERS PURE SINEWAVE SOLAR INVERTERS- PURE SINEWAVE (150W-3kW) • • • • • • • True sinewave output Power ON-OFF remote control Advanced microprocessor Input polarity / under voltage / over voltage protection Output short circuit / overload / over temperature protection Capable of driving highly reactive and capacitive loads Three color LED indicators. Model* Rated Power/Surge Power S150-X S300-X S600-X SK1000-X SK1500-X SK2000-X SK3000-X 150W/200W 300W/400W 600W/800W 1kW/2kW 1.
INVERTER/CHARGERS PURE SINEWAVE SKX-S SERIES - PURE SINEWAVE INVERTER (300W-5kW) • • • • • • Pure sinewave output With or Without Battery Charger High Surge Rating Hot Swappable Fuse Reverse Polarity Protection (Fuse) Remote Control Option: Control at a distance.
SWITCH MODE RECTIFIERS 1 PHASE & 3 PHASE ES1948 SERIES - SWITCHING MODE RECTIFIER The PHD ES1948-48V/39.6A is a switched mode rectifier (SMR) module designed to provide up to 39.6A of output current into a 48V nominal system. This rectifier has been designed especially to be used in conjunction with a battery to provide an uninterruptable DC power system. The low noise and high reliability make it ideally suited to telecommunications applications.
SWITCH MODE RECTIFIERS 1 PHASE & 3 PHASE Model ES1948 Input Voltage Wide Input Range: 90-275Vac or 310-480Vac Frequency Input Protection 44~66 Hz 13A HRC fuses at input of SMR(line and neutral); power circuit is turned off if the AC voltage exceeds 275Vac or falls to less than 90Vac Current Power Factor THD Efficiency <12A rms >0.
BATTERY CHARGER FOR 192VDC & 240VDC SYTEMS EXTERNAL BATTERY SUPER CHARGER FEATURES: DESCRIPTION: • • • • The PHD external battery charger is suitable for any 192Vdc and 240Vdc system (16 and 20 batteries in series). It is designed for 192Vdc and 240Vdc UPS systems to enable longer standby times for them. The 240Vdc version can be used with PHD’s T3 Series (6-10kVA models) and T4 Series (10-20kVA models) and the 192Vdc version can be used with PHD’s T3T Series (5-15kVA) and T4T Series (10-15kVA).
BATTERY CHARGERS MISCELLANEOUS AC-DC BATTERY CHARGERS FEATURES: • • • • • • • • • • • Multi step charger setup and auto shutdown (tri step) Fast charge, normal charge and average charge Voltage with auto sensor battery Full charge with auto shutdown Output short circuit protection Universal input voltage suitable for worldwide operation Anti-reverse voltage protect device Fast charge transferred into slow charge Overload protection LED status display Suitable for lead acid battery.
GENERATORS 1 PHASE & 3 PHASE STANDBY DIESEL GENERATOR SETS (10kVA-2000kVA) FEATURES: All units complete with exhaust systems, 12 hour fuel tanks (larger tanks available), batteries, automatic mains failure control panels and prime power base load control panels. The panels include standard metering switchgear, control gear and engine protection. Both single and three phase versions available.
CONSTANT VOLTAGE TRANSFORMERS 1 PHASE CONSTANT VOLTAGE TRANSFORMERS (150VA-20kVA) FEATURES: • Input Voltage: Single Phase, 230V (184-276). Other voltage on request • Supply Frequency: 50Hz • Output Voltage: 230V. Other voltages on request • Output Accuracy: Btter than 3% (1% option available) • Harmonic Distortion: Typically less than 2% • Effect of Frequency Change: 1% change in frequency produces approximately 2.
SERVO TYPE 1 PHASE SERVO TYPE FULLY AUTOMATIC VOLTAGE STABILISER (SINGLE PHASE) DESCRIPTION: The SVC fully automatic voltage regulator consists of a contact voltage regulator, samplingcontrol circuit and service motor as well. It features small waveform distortion, high efficiency and high power factor. It is also not affected by input frequency variations. It can be widely used in most situations where voltage stabilisation is required. Model 500VA 1kVA Input Voltage 1.
SERVO TYPE 3 PHASE SERVO TYPE FULLY AUTOMATIC VOLTAGE STABILISER (THREE PHASE) DESCRIPTION: • • • • • • • • • Microprocessor DSP control Automatic Voltage Regulation Protection against Brownouts and Overvoltages Short Circuit & Overload Protection Digital meter indicates line voltage and regulated voltage LED indicators to show status of working input and output Selectable Delay Time Built-in transformer, Square transformer or Servo motor Surge, Spike & Lightning Protection.
ELECTRONIC WITH ISOLATION 1 PHASE & 3 PHASE VOLTAGE STABILISER - ELECTRONIC (15kVA-30kVA) SPECIFICATIONS: FEATURES: • Wideband voltage regulation range (±25%) • True RMS voltage sensing ensures accurate regulation even with distorted mains (eg diesel generator) • Regulates individual phases to within 5% with input variations of up to ±25% • High capability to temporary overloads (eg aircon units, power supplies etc) • Over/Under voltage cut-out protects sensitive loads • TVSS Surge protection • Volt mete
ELECTRONIC 1 PHASE & 3 PHASE VOLTAGE STABILISER - ELECTRONIC (1kVA-75kVA) No Load Energy Consumption Relationship 20-25% FEATURES: • • • • • • • • • • • • • • • • 30% High Efficiency High Power Factor High Reliability Low Harmonic Distortion Low Environmental Pollution Low Electro Magnetic Interference APS Range of Products Solve Over 95% of Your Power Problems Micro Processor Control Micro Size - Quarter the size / weight of traditinal AVR Modular Design - Circuit designed in PCB modules, easy for
ELECTRONIC INDUSTRIAL INDUCTIVE TYPE VOLTAGE STABILISERS - INDUCTIVE (100kVA-1500kVA) FEATURES: • Strong, durable and high reliability - No contact point. Capable of sustaining spikes, surges or impulses from non-lionear loads. Long equipment life. • Protection - Redundant circuit control. Event history log for up to 200 events. Phase loss and phase reverse protection. Output over voltage and under voltage protection. Output overload protection. • High overload capability - 100% continuous load.
ELECTRONIC INDUSTRIAL INDUCTIVE TYPE Model** Capacity (kVA) 0100 100 0125 0150 125 150 0200 0250 0300 0350 0400 0500 0600 200 250 300 350 400 500 600 Circuit Type 0800 1000 800 1000 1250 1500 1250 1500 Inductive Voltage Regulator Input Phase 3P3W / 3P4W Voltage Range* -13% - +17% (option: -22% - +30%) Frequency 47Hz - 63Hz Output Phase 3P3W / 3P4W Voltage 200V / 208V / 220V, 380V / 400V / 415V ± 2% (±1%-±5% adjustable) Voltage Modulation < 4 V/s Overload 125%-40min;
FREQUENCY CONVERTERS 1 PHASE & 3 PHASE FREQUENCY CONVERTERS (500VA-300kVA) FEATURES: • Wide Application: Allows users to simulate Worldwide voltage and frequency for commercial applications (47-63Hz) and Military / Avionics / Marine applications at 400Hz. • Pure Sinewave Output: All models generate very clean sine waveforms output. It is not only a superior power source for R&D and Laboratory, but also a standard power source for EMI/EMC/ Safety testing.
FREQUENCY CONVERTERS 1 PHASE & 3 PHASE AFC SERIES - SINGLE PHASE SPECIFICATIONS: Model Capacity (kVA) Voltage AFC-500 AFC-11001 AFC-11003 AFC-11005 AFC-11010 AFC-11015 AFC-31020 AFC-31030 AFC-31045 AFC-31060 0.
GROUND MILITARY UNITS 1 PHASE & 3 PHASE GROUND - MILITARY POWER UNITS (500VA-300kVA) 400Hz Frequency Converters & 28VDC Power Supplies 28VDC Power Supply FEATURES: • Used as a DC power supply unit or voltage simulating test for GPU / Military Unit • 28VDC ±10% Standard Output Voltage; 100Amp to 2,000Amp Output Current • Automatic Input Line Monitoring • Output Voltage and Output Current Monitoring • Current Limit Adjustable • Auto Feedback Control Circuits.
GROUND MILITARY UNITS 1 PHASE & 3 PHASE AMF SERIES - SINGLE PHASE SPECIFICATIONS: Model Capacity (kVA) AMF-500 AMF-11001 AMF-11003 AMF-11005 AMF-11010 AMF-31020 AMF-31030 AMF-31045 AMF-31060 AMF-31100 0.
SOLAR PHOTOVOLTAIC PANELS SOLAR PANELS AND GREEN ENERGY SYSTEMS Powerhouse Distributions has launched a reliable, high performance and high quality range of: • Solar panels • Solar charge controllers (MPPT) • Pure and modified sinewave inverters • Solar water pumps • Wind turbines • Deep cycle (solar) batteries. SOLAR IN SOUTHERN AFRICA In the past few years, the number of solar system installations in Africa has grown at a tremendous rate.
SOLAR CHARGE CONTROLLERS SUNMAX-1500W SOLAR MPPT CONTROLLER GRID-TIE TOUGH INVERTER The Sunmax-1500W developed by AEC can be used universally for 12, 24, 36 and 48V. Its broad DC input voltage range makes sensible system configuration possible for almost all PV modules. Thanks to the integrated MPP tracking, the charger guarantees an energy yield that is 15-30% higher than that of conventional shunt and serial charge controllers.
ISOLATION TRANSFORMERS 1 PHASE & 3 PHASE ISOLATION TRANSFORMER (10kVA-40kVA) SPECIFICATIONS: DESCRIPTION: • Input Voltages: Single Phase 230V; Three phase 380, 400, 415V Delta • Frequency: 48-63Hz; 0.
ACCESSORIES SEALED & SEMI-SEALED BATTERIES BATTERIES - SEALED MAINTENANCE FREE Model Design Life Volts Capacity at 20Hr Rate (Ah) Dimensions (L x W x H) mm Mass (kg) 2.0 12V7-5 3-5 years 12V 7.2Ah 151 x 65 x 100 12V17-5 3-5 years 12V 17Ah 181 x 77 x 167 5.3 12V24-5 3-5 years 12V 24Ah 166 x 175 x 125 7.6 12V33-10 10 years 12V 33Ah 195 x 130 x 168 9.7 12V45-10 10 years 12V 45Ah 197 x 166 x 170 14.6 12V65-10 10 years 12V 65Ah 350 x 167 x 179 22.
ACCESSORIES CABINETS & SNMP CARDS SNMP CARDS • Internal units to be used with UPS’s equipped with an intelligen slot • External units to be used with UPS’s already equipped with RS232 communications • Web server interface • Linux, MAC and Windows compatible • Remotely control UPS’s • Battery management features for UPS’s being monitored • SMS and Email capable for several UPS alarms and statuses • Shut down multiple PC’s and/or servers during a power outage.