Installation manual

Page 26 ACM Series Dehumidifying Dryers
CAUTION!
• If you are mounting an ACM machine-mount dryer with a
magnet or transition adaptor on the machine throat, you must
provide additional support to hold the dryer securely on the
machine.
• Be aware that off-center static and dynamic hopper loading can
occur with machine vibration. Again, provide additional support
to hold the dryer securely on the machine.
• For ACM60 dryer units, you must provide additional support to
stabilize these units and to protect personnel when installing
on machine throats.
• Use caution and observe safety rules when lifting and placing
your dryer!
Figure 5A
Suggested Lift Rigging for ACM Dryers (Cart Mount)
Important!
Do not use a hoist to move or rig your ACM Dryer when it is
mounted on a cart! Moving the Dryer with a hoist will cause it to
become unstable and may cause damage to the Dryer and/or injury
to personnel!
Item Quantity Description Vendor Vendor part no.
1 1 Adjustable alloy chain sling McMaster-Carr 33665T32
2 2 Existing hopper lifting bracket — —
3 1 Drop forged steel eye nut McMaster-Carr 3019T15
4 1 Chain connector McMaster-Carr 3712T23
USE
FORK
LIFT
TRUCK
DO NOT
USE
ON
O
F
F
PROCESS
TEMPERATURE
DEW POINT
CONTROL POWER
ON OFF
ALARM
ALARM
Silencer
ALARM HORN