Specifications

::::~!l;,;t~~~':-J>':
REAR PANEL DESCRIPTION
3. REAR PANEL DESCRIPTION
+-1> '
•
POWER
+13.6 VDC
Advanced Electronic Applications, Inc.
.'.
•
ANTENNA
TV
••
•
AUDIO IN
RF AlTN
, Model VSB-70
•••
VIDEO IN
Figure
2
The VSB-70 rear panel connectors are listed below and illustrated in Figure 2:
NAME
FUNCTIONTYPE
-.
POWER
Input power to VSB-70. Center
Barrel jack, 5 mm,
J'1
+13.6 VDC
pin must be + 13.6 to +14 volts
!
DC from a well-reQulated source
ANTENNA
Connects to 70 cm antenna or
Coax connector, BNC
external amolifier
TV
Connects to television receiver
Coax Connector. Type F
AUDIO IN
Input connection for audio signals
RCA phono jack
from VCR or camera adaoter
VIDEO IN
Input connection for video signalsRCA phono jack
. ,
from VCR or camera adapter
RF ATTN
Adjusts the receive preamplifier
Screwdriver adjustment
gain. If overload of the receiver
occurs due to a mast mounted
receive amplifier, the gain the oftransceiver may be lowered by
turning the adjustment CCW. At
full gain the receive conversion
gain is typically 28 db. With theRF ATTN adjustment fully CCW
the gain is reduced to about 16
db.
4