Warranty

Materials:
a. Power Supply Cord
b. Power Supply
c. RGB Controller Box
d. RGB Controller Box Pin
e. LED Strip Light Spool.
f. Remote
**Warning: Make sure you have purchased a proper outlet cord is suitable for your country.
For example, U.S.A. requires a 6A 250V cord.
Pre-Installation Notes:
Plan out your installation before you remove the backing from the adhesive.
Make sure the surface where the strip lights are to be placed is clean and
suitable for strip light adhesive. Cleaning surfaces with alcohol achieves best results.
1. Open the box and check the materials
2. RGB Controller pin will be found in either LED Switch or RGB Controller box.
(Controller pin will usually already be plugged in to one cord or the other.)
3. Plug the LED spool adapter to the controller box (with pin) while ensuring the
arrows on male and female connections are aligned.
4. Plug AC power supply adapter to the RGB controller box.
5. Plug the power supply in to an appropriate power outlet.5. Plug the power supply in to an appropriate power outlet.
6. Use the remote to turn the LED Strip Lights on.
The controller pin fits between the two connectors.
a
b
c
d
e
f
LED Custom Strip Lighting Kit
User Manual
**Copper pads are repeated every 2” to provide an easy cut point to adjust
length as needed. Removing the IP65 silicone layer exposes the copper pads
so you may solder jumpers to make 90 degree turns or extensions with the
extension kit.
Warranty: This product is warranted free from defects in material and workmanship for one year from date of purchase. Warranty does not apply to misuse, abuse, neglect, accident, or improper use, etc.
Contact your reseller for a return merchandise authorization.