User's Manual

REFERENCEREFERENCE
PIN ASSIGNMENT
13
VGA Connector(Cable Side)
DVI Connector(Cable Side)
VGA CONNECTOR
POWER JACK(Monitor Side)
Note: When resolutions are shown that are lower than the pixel count of the LCD panel,
text may appear choppy or bold. This is normal for all current flat panel technologies
when displaying non-native resolutions on a full screen (below than 1280 x 1024
resolution). In flat panel technologies, each dot on the screen is actually one pixel, so to
expand resolutions to full screen, an interpolation of the resolution must be down. When
the interpolated resolution is not an exact multiple of the native resolution, the
mathematical interpolation necessary may cause some lines to appear thicker than others.
PPiinn 11
PPiinn 22
PPiinn 33
PPiinn 44
PPiinn 55
PPiinn 66
PPiinn 77
PPiinn 88
PPiinn 99
PPiinn 1100
PPiinn 1111
PPiinn 1122
PPiinn 1133
PPiinn 1144
PPiinn 1155
Red
Green
Blue
No Connection
Ground
Red Ground
Green Ground
Blue Ground
No Connection
Ground
Ground
DDC SDA
Horizontal Sync.
Vertical Sync.
DDC SCL
11
22
Ground
DC+12V input
Signal
T.M.D.S. Data2-
T.M.D.S. Data2+
T.M.D.S. Data2/4 Shield
T.M.D.S. Data4-(N.C)
T.M.D.S. Data4+(N.C)
DDC Clock
DDC Data
N.C
Signal
T.M.D.S. Data1-
T.M.D.S. Data1+
T.M.D.S. Data1/3 Shield
T.M.D.S. Data3-(N.C)
T.M.D.S. Data3+(N.C)
+5V Power
GND(for +5V)
Hot Plug Detect
Signal
T.M.D.S. Data0-
T.M.D.S. Data0+
T.M.D.S. Data0/5 Shield
T.M.D.S. Data5-(N.C)
T.M.D.S. Data5+(N.C)
T.M.D.S. Clock Shield
T.M.D.S. Clock+
T.M.D.S. Clock-
DVI-D Connector (TMDS Single Link)
Pin
1
2
3
4
5
6
7
8
Pin
9
10
11
12
13
14
15
16
Pin
17
18
19
20
21
22
23
24