User's Manual

ON-SCREEN CONTROLSON-SCREEN CONTROLS
MENU DESCRIPTIONS
9
PHASE
Select this control menu, and then use the and buttons to adjust the
screen image until it looks focused, crisp and sharp.
AUTO-LEVEL
This control will automatically make adjustment to the input levels of video
signal.(ex. 0.714Vp-p, 1.0Vp-p)
COLOR CONTROL
Select this control menu, then use the and buttons to scroll to the
desired color temperature. Use the button to select the 9300K, 6500K,
5500K, or USER for custom setting.
RR--GGAAIINN((RREEDD))
Select “USER” then use the button to scroll up and down the RGB
menu to R(Red). Use the and buttons to adjust the red level of
the display.
GG--GGAAIINN((GGRREEEENN))
Select “USER” then use the button to scroll up and down the RGB
menu to G(Green). Use the and buttons to adjust the red level of
the display.
BB--GGAAIINN((BBLLUUEE))
Select “USER” then use the button to scroll up and down the RGB
menu to B(Blue). Use the and buttons to adjust the red level of
the display.
SHARPNESS
Select this control menu, and then use the and buttons to get distinct
picture in movie mode. Default setting is 57% at text mode and 50% at
movie mode.
INPUT SELECT
Select this control menu, and then use the and buttons to select proper
video input signal either D-SUB (Analog R, G, B) or DVI-D (TMDS).
Default setting is D-SUB.
This function can be used by hot key on the front of monitor. (See clause 6.2.3)