User's Manual

GETTING STARTEDGETTING STARTED
CONTROL BUTTONS
5
OSD Buttons : The OSD control keys are located on lower left of the
monitor.
((EEnntteerr))
a. No OSD : This button will enable the main OSD menu.
b. Main OSD menu : Press this button to enter to the selected OSD
control menu.
c. Cotrol OSD menu : Swap the control item.
oorr ((UUpp//DDoowwnn))
: Use these buttons to increase or decrease each value.
a. No OSD :
- : Audio volume control menu will be shown.
- : Contrast & Brightness control menu will be shown. Press ' '
(Enter) to switch to another menu between Contrast and
Brightness.
b. Main OSD menu : Use these button to move up (or down)the OSD
selection menu and adjust the attribute of the monitor while in OSD
mode.
((AAuuttoo))
a. No OSD : This button can be used to 'Auto Adjustment' function. (Size,
Phase, and Color)
b. Main OSD menu : Press this button to exit from the main OSD menu.
c. Control OSD Menu : Return to the previous menu.
((SSeelleecctt))
: This button is not available when OSD menu is displayed.
a. No OSD :
- Pressing this button more than 1 second at out of OSD menu
allows you to change the video input signal either D-SUB(Analog)
or DVI(TMDS).
- Pressing this button shortly at out of OSD menu allows you to
select the text mode or movie mode.