User`s manual

27
Figure 5.2.2 Set Network Parameters
Step 3: Set the port map in the virtual severs of Forwarding. For example, one speed dome’s ports are 80
and 8000 and its IP address is 192.168.1.23. Another speed dome’s ports are 81 and 8001 and IP is
192.168.1.24. Next, enable all or TCP protocols. Enable the port map after pressing “Save.”
Figure 5.2.3 Set Network Parameters
With the settings mentioned above, map the router’s port 80 and 8000 to VP-16 at 192.168.1.23; and
port 81 and
8001 to VP-16 at 192.168.1.24. In this way, user can access the 192.168.1.23 through accessing the
router’s port
80 and 8000.
Note: The port of VP-16 cannot conflict with other ports.